PartsTable
Technical Data Sheet
Download PDF

30961-1 — SHAFT,AXLE,AUTOMOTIVE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

30961-1: SHAFT,AXLE,AUTOMOTIVE.

The SHAFT,AXLE,AUTOMOTIVE is a the manufacturer industrial component. Key specifications include material: PLASTIC OVERALL, hole_diameter: 0.136 INCHES NOMINAL IN, shoulder_height: 0.031 INCHES NOMINAL IN, outside_diameter: 0.250 INCHES NOMINAL IN, style_designator: SHOULDERED, shoulder_diameter: 0.187 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-821-6749, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
30961-1
NSN: 5310-00-821-6749
NIINs: 008216749, 009273333
FSC: 5310 — Nuts and Washers
CAGE: 14058 — THE DEWEY ELECTRONICS CORPORATION (USA)
SPECIFICATIONS
materialPLASTIC OVERALL
hole_diameter0.136 INCHES NOMINAL IN
shoulder_height0.031 INCHES NOMINAL IN
outside_diameter0.250 INCHES NOMINAL IN
style_designatorSHOULDERED
shoulder_diameter0.187 INCHES NOMINAL IN
material_thickness0.062 INCHES NOMINAL IN
material_document_and_classificationMIL-M-20693 MIL SPEC SINGLE MATERIAL RESPONSE OR L-P-410 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5310-00-821-6749
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 30961-1 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHOULDER HEIGHT: 0.031 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SHOULDERED
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-M-20693 MIL SPEC SINGLE MATERIAL RESPONSE OR L-P-410 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
OUTSIDE DIAMETER: 0.250 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.062 INCHES NOMINAL IN
•
SHOULDER DIAMETER: 0.187 INCHES NOMINAL IN
•
MATERIAL: PLASTIC OVERALL
•
HOLE DIAMETER: 0.136 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SHOULDER HEIGHT0.031 INCHES NOMINAL IN
STYLE DESIGNATORSHOULDERED
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-M-20693 MIL SPEC SINGLE MATERIAL RESPONSE OR L-P-410 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
OUTSIDE DIAMETER0.250 INCHES NOMINAL IN
MATERIAL THICKNESS0.062 INCHES NOMINAL IN
SHOULDER DIAMETER0.187 INCHES NOMINAL IN
MATERIALPLASTIC OVERALL
HOLE DIAMETER0.136 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy 30961-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 30961-1?
30961-1 is a SHAFT,AXLE,AUTOMOTIVE.
What is the NSN for 30961-1?
30961-1 is cataloged in the U.S. Government catalog under NSN 5310-00-821-6749. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 30961-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.