PartsTable
Technical Data Sheet
Download PDF

309192 — 309192

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

309192: 309192.

The 309192 is a the manufacturer industrial component. Key specifications include end_item_identification: AN/UGC-94,TELETYPEWRITER SET. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-121-8382, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 309192
NSN: 5310-00-121-8382
NIINs: 001218382, 001615307, 009684600
FSC: 5310 — Nuts and Washers
CAGE: 1UVT5 — BRP US INC (USA)
SPECIFICATIONS
end_item_identificationAN/UGC-94,TELETYPEWRITER SET
NSN5310-00-121-8382
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 309192 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DIAMETER: 0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-766 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
PERIPHERAL SHAPE STYLE: ROUND
•
MATERIAL: STEEL COMP 430 OVERALL
•
CENTER HOLE SHAPE STYLE: ROUND
•
HOLE DIAMETER: 0.323 INCHES MINIMUM AND 0.335 INCHES MAXIMUM IN
•
THICKNESS: 0.055 INCHES MINIMUM AND 0.071 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL DIAMETER0.678 INCHES MINIMUM AND 0.698 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-766 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
PERIPHERAL SHAPE STYLEROUND
MATERIALSTEEL COMP 430 OVERALL
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER0.323 INCHES MINIMUM AND 0.335 INCHES MAXIMUM IN
THICKNESS0.055 INCHES MINIMUM AND 0.071 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 1
Z309192Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 309192?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 309192?
309192 is a 309192. It is classified as a MRO (MRO_GENERAL).
What parts can replace 309192?
There is 1 known substitute for 309192: Z309192. Substitute compatibility should be verified for your specific system.
What is the NSN for 309192?
309192 is cataloged in the U.S. Government catalog under NSN 5310-00-121-8382. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 309192

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.