PartsTable
Technical Data Sheet
Download PDF

308458 — O-RING

✓ Government record, cited
Manhattan · ORING SEAL
PRODUCT OVERVIEW

308458: O-RING.

High-speed cables deliver high-definition performance._x000D_ HDMI has become the standard digital connection, delivering the highest-quality audio and video signal over a single cable. Manhattan High Speed HDMI Cables are designed and carefully constructed to meet the evolving needs of the high-definition marketplace. Manhattan High Speed HDMI Shielded Cables provide 1080p resolution and a bandwidth of 10.2 Gigabits per second at 340 MHz.

These high-quality cables provide high-definition video and multichannel, digital audio with increased performance characteristics, greater accuracy and expanded features. This part is cataloged in the U.S. Government catalog under NSN 5331-00-089-8976, indicating validated use in U.S.

government and defense logistics supply chains.

WHERE IT FITS
308458
NSN: 5331-00-089-8976
FSC: 5331 — O-ring
CAGE: 1UVT5 — BRP US INC (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC
center_hole_diameter1.602 INCHES MINIMUM AND 1.622 INCHES MAXIMUM IN
cross-sectional_height0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
NSN5331-00-089-8976
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 308458 MFR: Manhattan ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 1.602 INCHES MINIMUM AND 1.622 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SYNTHETIC
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
CENTER HOLE DIAMETER1.602 INCHES MINIMUM AND 1.622 INCHES MAXIMUM IN
MATERIALRUBBER SYNTHETIC
SUBSTITUTES & CROSS-REFERENCES 1
10022281Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 308458?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 308458?
308458 is a O-RING manufactured by Manhattan.
What parts can replace 308458?
There is 1 known substitute for 308458: 10022281. Substitute compatibility should be verified for your specific system.
What is the NSN for 308458?
308458 is cataloged in the U.S. Government catalog under NSN 5331-00-089-8976. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 308458