PartsTable
Technical Data Sheet
Download PDF

3082759 — CLAMP,SYNCHRO

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

3082759: CLAMP,SYNCHRO.

The CLAMP,SYNCHRO is a the manufacturer industrial component. Key specifications include height: 0.900 INCHES NOMINAL IN, material: STEEL COMP 301, hole_diameter: 0.250 INCHES NOMINAL IN, shank_diameter: 0.250 INCHES NOMINAL IN, effective_height: 0.875 INCHES NOMINAL IN, outside_diameter: 5.750 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-478-7177, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3082759
NSN: 5340-01-478-7177
FSC: 5340 — Hardware, Commercial
CAGE: 75Q65 — OSHKOSH DEFENSE LLC (USA)
SPECIFICATIONS
height0.900 INCHES NOMINAL IN
materialSTEEL COMP 301
hole_diameter0.250 INCHES NOMINAL IN
shank_diameter0.250 INCHES NOMINAL IN
effective_height0.875 INCHES NOMINAL IN
outside_diameter5.750 INCHES NOMINAL IN
special_featuresKNOWN BY MANUFACTURE AS V-CLAMP CAT TURBO
style_designatorROUND OR ROUND W/ONE FLAT SIDE
end_item_identificationUSE ON MK23, MK25, MK27, MK28, MK29. MK30, MK36
NSN5340-01-478-7177
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 3082759 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.250 INCHES NOMINAL IN
•
STYLE DESIGNATOR: ROUND OR ROUND W/ONE FLAT SIDE
•
OUTSIDE DIAMETER: 5.750 INCHES NOMINAL IN
•
EFFECTIVE HEIGHT: 0.875 INCHES NOMINAL IN
•
HEIGHT: 0.900 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 301
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.250 INCHES NOMINAL IN
STYLE DESIGNATORROUND OR ROUND W/ONE FLAT SIDE
OUTSIDE DIAMETER5.750 INCHES NOMINAL IN
EFFECTIVE HEIGHT0.875 INCHES NOMINAL IN
HEIGHT0.900 INCHES NOMINAL IN
SPECIAL FEATURESKNOWN BY MANUFACTURE AS V-CLAMP CAT TURBO
END ITEM IDENTIFICATIONUSE ON MK23, MK25, MK27, MK28, MK29. MK30, MK36
MATERIALSTEEL COMP 301
HOLE DIAMETER0.250 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 2
VT10575A02-3BDCPReference document
Same NSN cross-reference
Reference document — Secondary reference
VT10575A02-3BDCP BSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 3082759?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3082759?
3082759 is a CLAMP,SYNCHRO.
What parts can replace 3082759?
There are 2 known substitutes for 3082759: VT10575A02-3BDCP, VT10575A02-3BDCP B. Substitute compatibility should be verified for your specific system.
What is the NSN for 3082759?
3082759 is cataloged in the U.S. Government catalog under NSN 5340-01-478-7177. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3082759

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.