PartsTable
Technical Data Sheet
Download PDF

308-116 — RESISTOR,FIXED,WIRE WOUND,INDUCT

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

308-116: RESISTOR,FIXED,WIRE WOUND,INDUCT.

RESISTOR,FIXED,WIRE WOUND,INDUCT. Key specifications include shape: ROUND, length: 36.000 INCHES NOMINAL IN, weight: 10.0 POUNDS LBS, material: STEEL COMP 308 OVERALL, body_length: 0.375 INCHES MINIMUM AND 0.437 INCHES MAXIMUM IN, body_diameter: 0.063 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5905-01-168-0733, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 308-116
NSN: 5905-01-168-0733
NIINs: 011680733, 013502585
FSC: 5905 — Resistor
CAGE: 80009 — TEKTRONIX, INC. (USA)
SPECIFICATIONS
shapeROUND
length36.000 INCHES NOMINAL IN
weight10.0 POUNDS LBS
materialSTEEL COMP 308 OVERALL
body_length0.375 INCHES MINIMUM AND 0.437 INCHES MAXIMUM IN
body_diameter0.063 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
cubic_measure0.003 CUBIC INCHES
physical_formSTRAIGHT
terminal_typeWIRE LEAD
inclosure_typeENCAPSULATED
terminal_length1.500 INCHES MINIMUM IN
outside_diameter0.062 INCHES NOMINAL IN
NSN5905-01-168-0733
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available RESISTOR,FIXED,WIRE WOUND,INDUCT TITLE COMPONENT PN 308-116 MFR RESISTOR,FIXED,WIRE WO
KEY FEATURES
•
RESISTANCE TOLERANCE IN PERCENT: -1.000 TO 1.000
•
TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS: -50.0 TO 50.0
•
BODY DIAMETER: 0.063 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
•
ELECTRICAL RESISTANCE: 2.210 OHMS
•
INCLOSURE TYPE: ENCAPSULATED
•
TERMINAL TYPE: WIRE LEAD
•
TERMINAL LENGTH: 1.500 INCHES MINIMUM IN
•
TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS: -55.0 TO 275.0
TECHNICAL CHARACTERISTICS
RESISTANCE TOLERANCE IN PERCENT-1.000 TO 1.000
TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS-50.0 TO 50.0
BODY DIAMETER0.063 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
ELECTRICAL RESISTANCE2.210 OHMS
INCLOSURE TYPEENCAPSULATED
TERMINAL TYPEWIRE LEAD
TERMINAL LENGTH1.500 INCHES MINIMUM IN
TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS-55.0 TO 275.0
STYLE DESIGNATORAXIAL TERMINAL EACH END
RELIABILITY FAILURE RATE LEVEL IN PERCENT0.001
SUBSTITUTES & CROSS-REFERENCES 9
308-0116-00Reference document
Same NSN cross-reference
Reference document — Replaced / superseded reference
RWR80S2R21FMReference document
Same NSN cross-reference
Reference document — Secondary reference
BW-20-2.2OHM-5%Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
MIL-R-39007/8Reference document
Same NSN cross-reference
Reference document — Secondary reference
MILR26-5Reference document
Same NSN cross-reference
Reference document — Replaced / superseded reference
RW70U2R21FReference document
Same NSN cross-reference
Reference document — Replaced / superseded reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 308-116?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 308-116?
308-116 is a RESISTOR,FIXED,WIRE WOUND,INDUCT. It is classified as a MRO (MRO_GENERAL).
What parts can replace 308-116?
There are 9 known substitutes for 308-116: 308-0116-00, RWR80S2R21FM, BW-20-2.2OHM-5% and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 308-116?
308-116 is cataloged in the U.S. Government catalog under NSN 5905-01-168-0733. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 308-116