PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 307SL
307SL ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 35.00 MILLIMETERS NOMINAL MM, overall_width: 21.0 MILLIMETERS NOMINAL MM, load_direction: RADIAL, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-155-6159, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
307SL
NSN: 3110-00-155-6159
FSC: 3110
CAGE: 38443 — SKF USA INC. (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter35.00 MILLIMETERS NOMINAL MM
overall_width21.0 MILLIMETERS NOMINAL MM
load_directionRADIAL
surface_finishGROUND
shield_quantity1
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
features_providedSNAP RING-GROOVE MOUNTING AND MOUNTING GROOVE
overall_outside_diameter80.00 MILLIMETERS NOMINAL MM
internal_fit-up_designationSTANDARD
nondefinitive_spec/std_data111CL5GR00 TYPE
NSN3110-00-155-6159
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 307SL · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL OUTSIDE DIAMETER: 80.00 MILLIMETERS NOMINAL MM
•
BORE SHAPE: STRAIGHT
•
MATERIAL: STEEL BALL
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
INTERNAL FIT-UP DESIGNATION: LOOSE
•
LOAD DIRECTION: RADIAL
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL OUTSIDE DIAMETER80.00 MILLIMETERS NOMINAL MM
BORE SHAPESTRAIGHT
MATERIALSTEEL BALL
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
MATERIALSTEEL OUTER RING
INTERNAL FIT-UP DESIGNATIONLOOSE
LOAD DIRECTIONRADIAL
MATERIALSTEEL INNER RING
STANDARD TOLERANCE DESIGNATIONABEC NO.1
BORE DIAMETER35.00 MILLIMETERS NOMINAL MM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
7307GInterchangeable
interchangeable cross-reference
interchangeable
MRC307SFGIInterchangeable
interchangeable cross-reference
interchangeable
47607Interchangeable
interchangeable cross-reference
interchangeable
307MFQ6B7Interchangeable
interchangeable cross-reference
interchangeable
E0240Interchangeable
interchangeable cross-reference
interchangeable
307WDInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 307SL?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 307SL?
307SL is a BEARING,BALL,ANNULAR.
What parts can replace 307SL?
There are 15 known substitutes for 307SL: 7307G, MRC307SFGI, 47607 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 307SL?
307SL is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-155-6159. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 307SL

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026