PartsTable
Technical Data Sheet
30787 ✓ Verified by PartsTable
Freecom · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The storage specialist Freecom Technologies is extending its product portfolio in the area of professional<br>storage by inexpensive tape drives in a bulk variant. The nonbranded tape drives are equipped with the proven HP and Quantum technology and are available immediately in the formats DDS, DLT and LTO-Ultrium.<br><br>The tape drives with the new SAS (Serial Attached SCSI) interface technology are also available as bulk versions. The SAS interfaces today frequently already integrated as standard on the motherboard offer extremely high data transfer rates, coupled with simple installation.

A further factor relevant for costing is that SAS drives then no longer require a host adapter, such as often required for LVD-SCSI drives. For LTO-Ultrium drives, the new interface technology means a significant increase in the transfer rates. With an SAS interface therefore, this enables data back-up with an LTO-Ultrium 4 drive with a capacity of 800-1600 GB of up to 864 GB per hour at a speed o This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-297-9071, indicating validated use in U.S.

government and defense logistics supply chains.

WHERE IT FITS
30787
NSN: 5310-00-297-9071
FSC: 5310
CAGE: 53397 — NUMAX ELECTRONICS INC (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
thickness0.250 INCHES NOMINAL IN
body_styleSTRAIGHT SHAPE, INTERNAL COUPLING
bore_stylePLAIN BOTH ENDS
shell_typeSOLID
design_typeSPUR FIRST GEAR
constructionSOLID
terminal_typeSOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING
overall_length0.969 INCHES NOMINAL IN
shell_materialCOPPER ALLOY
hardness_rating90.0 ROCKWELL SUPERFICIAL 15-N MINIMUM OVERALL
insert_materialPLASTIC SINGLE MATING END
NSN5310-00-297-9071
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 30787 · Freecom ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
30787Interchangeable
interchangeable cross-reference
interchangeable
10911Interchangeable
interchangeable cross-reference
interchangeable
805183Interchangeable
interchangeable cross-reference
interchangeable
Q3104D632-1Interchangeable
Same NIIN cross-reference
interchangeable
333-0204-00Interchangeable
Same NIIN cross-reference
interchangeable
062AANInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy 30787?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 30787?
30787 is a HOSE ASSEMBLY,NONMETALLIC manufactured by Freecom.
What parts can replace 30787?
There are 10 known substitutes for 30787: 30787, 10911, 805183 and 7 more. Substitute compatibility should be verified for your specific system.
Is 30787 still available?
30787 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 30787