PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 30762
30762 ✓ Verified by PartsTable
Lindy · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,THRUST is a Lindy industrial component. Key specifications include design_type: CHUCKING, inside_taper_size: 1MT MORSE, outside_taper_size: 5MT MORSE, part_name_assigned_by_controlling_agency: PRECISION MORSE TAPER SLEEVE. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-198-1502, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
30762
NSN: 3110-00-198-1502
FSC: 3110
CAGE: 95019 — DANA CORP SPICER TRANSMISSION DIV (USA)
SPECIFICATIONS
design_typeCHUCKING
inside_taper_size1MT MORSE
outside_taper_size5MT MORSE
part_name_assigned_by_controlling_agencyPRECISION MORSE TAPER SLEEVE
NSN3110-00-198-1502
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 30762 · Lindy ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE SMALLEST DIAMETER: 2.1345 INCHES MINIMUM AND 2.1355 INCHES MAXIMUM IN
•
OVERALL OUTSIDE DIAMETER: 3.5470 INCHES MINIMUM AND 3.5770 INCHES MAXIMUM IN
•
ALIGNMENT TYPE: RIGID
•
SURFACE FINISH: GROUND
•
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
•
RETAINER FABRICATION METHOD: PRESSED
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL HEIGHT0.7970 INCHES MINIMUM AND 0.8070 INCHES MAXIMUM IN
BORE SMALLEST DIAMETER2.1345 INCHES MINIMUM AND 2.1355 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER3.5470 INCHES MINIMUM AND 3.5770 INCHES MAXIMUM IN
ALIGNMENT TYPERIGID
SURFACE FINISHGROUND
SPECIAL FEATURESWASHERS OVERLAP,ID OF BOTH WASHERS UNDER CUT TO RETAIN FERRULE,OD AND HEIGHT TOLERANCES INCLUDE BAND,PREPACK WITH MIL-G-23827,BANDED OD
THRUST DIRECTIONAL CAPABILITY DESIGNATIONSINGLE
RETAINER FABRICATION METHODPRESSED
ALIGNMENT TYPERIGID
THRUST DIRECTIONAL CAPABILITY DESIGNATIONSINGLE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
RA3419Interchangeable
interchangeable cross-reference
interchangeable
A3419Interchangeable
interchangeable cross-reference
interchangeable
30762Interchangeable
interchangeable cross-reference
interchangeable
5220PL0935265Interchangeable
interchangeable cross-reference
interchangeable
9143-12Interchangeable
interchangeable cross-reference
interchangeable
9143Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 30762?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 30762?
30762 is a BEARING,BALL,THRUST manufactured by Lindy.
What parts can replace 30762?
There are 18 known substitutes for 30762: RA3419, A3419, 30762 and 15 more. Substitute compatibility should be verified for your specific system.
Is 30762 still available?
30762 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 30762

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026