PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 3070AS517-1
3070AS517-1 ✓ Verified by PartsTable
— · HOSE FITTING
WHAT YOU NEED TO KNOW
PTFE tape on tapered threads (NPT/BSPT) JIC/AN flare connections seal metal-to-metal — no tape
NPT != BSPT — look identical, NOT interchangeable
PRODUCT OVERVIEW

The SWIVEL JOINT,HYDRAULIC is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, connection_type: THREADED INTERNAL TUBE ALL ENDS, special_features: WEAPON SYSTEM ESSENTIAL, operating_pressure: 2500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS, nominal_thread_size: 1.625 INCHES SECOND END IN, end_item_identification: A/S32M-17 MAINTENANCE HOIST,GROUND SUPPORT EQUIPMENT FOR THE F/A-18 HORNET AIRCRAFT. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-01-431-9168, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3070AS517-1
NSN: 4730-01-431-9168
FSC: 4730
CAGE: 30003 — NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialSTEEL OVERALL
connection_typeTHREADED INTERNAL TUBE ALL ENDS
special_featuresWEAPON SYSTEM ESSENTIAL
operating_pressure2500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
nominal_thread_size1.625 INCHES SECOND END IN
end_item_identificationA/S32M-17 MAINTENANCE HOIST,GROUND SUPPORT EQUIPMENT FOR THE F/A-18 HORNET AIRCRAFT
thread_quantity_per_inch12 ALL ENDS
thread_series_designatorUN SECOND END
criticality_code_justificationFEAT
NSN4730-01-431-9168
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: 3070AS517-1 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NOMINAL THREAD SIZE: 1.880 INCHES FIRST END IN
•
OPERATING PRESSURE: 2500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
•
MATERIAL: STEEL OVERALL
•
THREAD SERIES DESIGNATOR: UN SECOND END
•
CONNECTION TYPE: THREADED INTERNAL TUBE ALL ENDS
TECHNICAL CHARACTERISTICS (FLIS)
NOMINAL THREAD SIZE1.880 INCHES FIRST END IN
OPERATING PRESSURE2500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
SPECIAL FEATURESWEAPON SYSTEM ESSENTIAL
NOMINAL THREAD SIZE1.625 INCHES SECOND END IN
MATERIALSTEEL OVERALL
THREAD SERIES DESIGNATORUN SECOND END
END ITEM IDENTIFICATIONA/S32M-17 MAINTENANCE HOIST,GROUND SUPPORT EQUIPMENT FOR THE F/A-18 HORNET AIRCRAFT
CONNECTION TYPETHREADED INTERNAL TUBE ALL ENDS
THREAD QUANTITY PER INCH12 ALL ENDS
CRITICALITY CODE JUSTIFICATIONFEAT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
MG1003422-0015Interchangeable
interchangeable cross-reference
interchangeable
MG1003422-001Interchangeable
interchangeable cross-reference
interchangeable
CB27466-015Interchangeable
interchangeable cross-reference
interchangeable
27172Interchangeable
interchangeable cross-reference
interchangeable
PL7517E97FIND25Interchangeable
interchangeable cross-reference
interchangeable
J2045-0007Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 3070AS517-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3070AS517-1?
3070AS517-1 is a SWIVEL JOINT,HYDRAULIC.
What parts can replace 3070AS517-1?
There are 9 known substitutes for 3070AS517-1: MG1003422-0015, MG1003422-001, CB27466-015 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 3070AS517-1?
3070AS517-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-01-431-9168. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3070AS517-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026