PartsTable
Technical Data Sheet
Download PDF

306931 — CLEVIS,ROD END

✓ Government record, cited
Thule · ORING SEAL
PRODUCT OVERVIEW

306931: CLEVIS,ROD END.

The CLEVIS,ROD END is a Thule industrial component. Key specifications include material: STEEL COMP 410 OVERALL, fork_depth: 0.980 INCHES MINIMUM AND 1.020 INCHES MAXIMUM IN, hole_diameter: 0.190 INCHES MINIMUM AND 0.192 INCHES MAXIMUM IN, overall_width: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN, fork_span_width: 0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN, fork_arm_thickness: 0.122 INCHES MINIMUM AND 0.127 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-570-9028, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
306931
NSN: 5340-00-570-9028
FSC: 5340 — Hardware, Commercial
CAGE: 77445 — RTX CORPORATION DBA PRATT & WHITNEY DIV PRATT &WHITNEY (USA)
SPECIFICATIONS
materialSTEEL COMP 410 OVERALL
fork_depth0.980 INCHES MINIMUM AND 1.020 INCHES MAXIMUM IN
hole_diameter0.190 INCHES MINIMUM AND 0.192 INCHES MAXIMUM IN
overall_width0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
fork_span_width0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN
fork_arm_thickness0.122 INCHES MINIMUM AND 0.127 INCHES MAXIMUM IN
rod_connection_bore_depth0.480 INCHES MINIMUM AND 0.490 INCHES MAXIMUM IN
rod_connection_bore_diameter0.187 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
material_document_and_classificationAMS 5613 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5340-00-570-9028
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 306931 MFR: Thule ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FORK SPAN WIDTH: 0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN
•
FORK ARM THICKNESS: 0.122 INCHES MINIMUM AND 0.127 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5613 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
ROD CONNECTION BORE DIAMETER: 0.187 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
•
ROD CONNECTION BORE DEPTH: 0.480 INCHES MINIMUM AND 0.490 INCHES MAXIMUM IN
•
MATERIAL: STEEL COMP 410 OVERALL
•
FORK DEPTH: 0.980 INCHES MINIMUM AND 1.020 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
FORK SPAN WIDTH0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN
FORK ARM THICKNESS0.122 INCHES MINIMUM AND 0.127 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5613 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OVERALL WIDTH0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
ROD CONNECTION BORE DIAMETER0.187 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
ROD CONNECTION BORE DEPTH0.480 INCHES MINIMUM AND 0.490 INCHES MAXIMUM IN
MATERIALSTEEL COMP 410 OVERALL
FORK DEPTH0.980 INCHES MINIMUM AND 1.020 INCHES MAXIMUM IN
HOLE DIAMETER0.190 INCHES MINIMUM AND 0.192 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy 306931?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 306931?
306931 is a CLEVIS,ROD END manufactured by Thule.
What is the NSN for 306931?
306931 is cataloged in the U.S. Government catalog under NSN 5340-00-570-9028. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 306931

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.