PartsTable
Technical Data Sheet
Download PDF

3068290-4 — SCREW,CAP,SOCKET HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

3068290-4: SCREW,CAP,SOCKET HEAD.

The SCREW,CAP,SOCKET HEAD is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 2A A, head_diameter: 0.207 INCHES MINIMUM AND 0.225 INCHES MAXIMUM IN, thread_length: 0.313 INCHES MINIMUM IN, fastener_length: 0.375 INCHES NOMINAL IN, locking_feature: PATCH OR STRIP THREADS. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-977-8899, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3068290-4
NSN: 5305-00-977-8899
FSC: 5305 — Screws
CAGE: 77068 — ALLIED-SIGNAL INC DBA ALLIED-SIGNAL AEROSPACE CO ELECTRODYNAMICS DIV (USA)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class2A A
head_diameter0.207 INCHES MINIMUM AND 0.225 INCHES MAXIMUM IN
thread_length0.313 INCHES MINIMUM IN
fastener_length0.375 INCHES NOMINAL IN
locking_featurePATCH OR STRIP THREADS
thread_directionRIGHT-HAND
countersink_angle99.0 DEGREES MINIMUM AND 100.0 DEGREES MAXIMUM
surface_treatmentPASSIVATE OVERALL
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.112 INCHES IN
thread_quantity_per_inch40
NSN5305-00-977-8899
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 3068290-4 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 0.375 INCHES NOMINAL IN
•
THREAD LENGTH: 0.313 INCHES MINIMUM IN
•
NOMINAL THREAD DIAMETER: 0.112 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
LOCKING FEATURE: PATCH OR STRIP THREADS
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
INTERNAL DRIVE STYLE: CROSS RECESS TYPE 1
TECHNICAL CHARACTERISTICS
FASTENER LENGTH0.375 INCHES NOMINAL IN
THREAD LENGTH0.313 INCHES MINIMUM IN
NOMINAL THREAD DIAMETER0.112 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
LOCKING FEATUREPATCH OR STRIP THREADS
SURFACE TREATMENTPASSIVATE OVERALL
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
COUNTERSINK ANGLE99.0 DEGREES MINIMUM AND 100.0 DEGREES MAXIMUM
THREAD CLASS2A A
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES 1
5305PL0146532Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 3068290-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3068290-4?
3068290-4 is a SCREW,CAP,SOCKET HEAD.
What parts can replace 3068290-4?
There is 1 known substitute for 3068290-4: 5305PL0146532. Substitute compatibility should be verified for your specific system.
What is the NSN for 3068290-4?
3068290-4 is cataloged in the U.S. Government catalog under NSN 5305-00-977-8899. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3068290-4