PartsTable
Technical Data Sheet
306565 ✓ Verified by PartsTable
Thule · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BRACKET,MOUNTING is a Thule industrial component. Key specifications include end_item_identification: END ITEM NSN: 5820-01-504-8870, part_name_assigned_by_controlling_agency: BRACKET-SIDE KICK. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-537-2947, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
306565
NSN: 5340-01-537-2947
FSC: 5340
CAGE: A196G — MASTSYSTEM INT'L OY (FIN)
SPECIFICATIONS
special_featuresBRACKET ASSEMBLY CONSISTS OF QTY 1 TILT BRACKET CLAMP ASSEMBLY AND QTY1 REAR MOUNTING BRACKET CLAMP ASSEMBLY; USED ON ANTENNA, 25M, MAST P/N: 00-2780894 CAGE: 67032
end_item_identificationEND ITEM NSN: 5820-01-504-8870
part_name_assigned_by_controlling_agencyBRACKET-SIDE KICK
NSN5340-01-537-2947
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 306565 MFR: Thule ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
TECHNICAL CHARACTERISTICS (FLIS)
PART NAME ASSIGNED BY CONTROLLING AGENCYBRACKET-SIDE KICK
END ITEM IDENTIFICATIONEND ITEM NSN: 5820-01-504-8870
SPECIAL FEATURESBRACKET ASSEMBLY CONSISTS OF QTY 1 TILT BRACKET CLAMP ASSEMBLY AND QTY1 REAR MOUNTING BRACKET CLAMP ASSEMBLY; USED ON ANTENNA, 25M, MAST P/N: 00-2780894 CAGE: 67032
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
00-2780894Interchangeable
interchangeable cross-reference
interchangeable
801774Interchangeable
interchangeable cross-reference
interchangeable
306845Interchangeable
interchangeable cross-reference
interchangeable
303529Interchangeable
interchangeable cross-reference
interchangeable
305395Interchangeable
interchangeable cross-reference
interchangeable
308553Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 306565?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 306565?
306565 is a BRACKET,MOUNTING manufactured by Thule.
What parts can replace 306565?
There are 7 known substitutes for 306565: 00-2780894, 801774, 306845 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 306565?
306565 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-537-2947. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 306565