PartsTable
Technical Data Sheet
PartsTable / MRO / 3061-8
3061-8 ✓ Verified by PartsTable
Hama · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

RESISTOR,VARIABLE,NONWIRE WOUND,. Key specifications include guide: NOT INCLUDED, diameter: 0.2812 INCHES NOMINAL IN, end_type: EXTERNAL THREAD SECOND END, material: STEEL LOCATION NOT OTHERWISE SPECIFIED, flute_type: INTEGRAL, head_style: HEADLESS (SETSCREW). This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-206-0170, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 3061-8
NSN: 5305-00-206-0170
FSC: 5305
CAGE: 00781 — CESSNA AIRCRAFT CO ARC AVIONICS DIV (USA)
SPECIFICATIONS
guideNOT INCLUDED
diameter0.2812 INCHES NOMINAL IN
end_typeEXTERNAL THREAD SECOND END
materialSTEEL LOCATION NOT OTHERWISE SPECIFIED
flute_typeINTEGRAL
head_styleHEADLESS (SETSCREW)
shank_typeSTRAIGHT
point_styleCUP
reamer_typeSHANK
flute_designSTRAIGHT
flute_length1.500 INCHES NOMINAL IN
spline_width0.022 INCHES MINIMUM AND 0.023 INCHES MAXIMUM IN
NSN5305-00-206-0170
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 3061-8 · Hama ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD LENGTH: 0.125 INCHES MAXIMUM IN
•
INTERNAL DRIVE STYLE: CROSS RECESS TYPE 1
•
HEAD STYLE: HEADLESS (SETSCREW)
•
MATERIAL: STEEL OVERALL
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
THREAD CLASS: 3A A
•
FASTENER LENGTH: 0.125 INCHES NOMINAL IN
•
SPLINE MAJOR DIAMETER: 0.078 INCHES MINIMUM AND 0.079 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
THREAD LENGTH0.125 INCHES MAXIMUM IN
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
HEAD STYLEHEADLESS (SETSCREW)
MATERIALSTEEL OVERALL
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
THREAD CLASS3A A
FASTENER LENGTH0.125 INCHES NOMINAL IN
SPLINE MAJOR DIAMETER0.078 INCHES MINIMUM AND 0.079 INCHES MAXIMUM IN
THREAD QUANTITY PER INCH32
SPLINE WIDTH0.022 INCHES MINIMUM AND 0.023 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
A11415.001.124Interchangeable
interchangeable cross-reference
interchangeable
A-1402Interchangeable
interchangeable cross-reference
interchangeable
AS6018Interchangeable
interchangeable cross-reference
interchangeable
131551-1Interchangeable
interchangeable cross-reference
interchangeable
JC497Interchangeable
interchangeable cross-reference
interchangeable
FFS103TYPEIVSTYLE4Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 3061-8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3061-8?
3061-8 is a RESISTOR,VARIABLE,NONWIRE WOUND, manufactured by Hama. It is classified as a MRO (MRO_GENERAL).
What parts can replace 3061-8?
There are 20 known substitutes for 3061-8: A11415.001.124, A-1402, AS6018 and 17 more. Substitute compatibility should be verified for your specific system.
Is 3061-8 still available?
3061-8 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3061-8

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026