PartsTable
Technical Data Sheet
Download PDF

306-16244 — SCREW,CAP,HEXAGON HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

306-16244: SCREW,CAP,HEXAGON HEAD.

The SCREW,CAP,HEXAGON HEAD is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: HEXAGON, head_height: 0.250 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN, thread_length: 2.000 INCHES NOMINAL IN, fastener_length: 2.000 INCHES NOMINAL IN, thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-467-6450, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
306-16244
NSN: 5305-01-467-6450
FSC: 5305 — Screws
CAGE: 9F512 — PARKER-HANNIFIN CORPORATION DBA PNEUTRONICS DIV HYDRAULIC PUMP DIVISION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
head_styleHEXAGON
head_height0.250 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
thread_length2.000 INCHES NOMINAL IN
fastener_length2.000 INCHES NOMINAL IN
thread_directionRIGHT-HAND
surface_treatmentOXIDE OVERALL
width_between_flats0.592 INCHES MINIMUM AND 0.600 INCHES MAXIMUM IN
nominal_thread_diameter0.375 INCHES IN
thread_quantity_per_inch16
thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
material_document_and_classificationANSI/ASMEB1.1 ASSN STD 1ST MATERIAL RESPONSE OR SAEJ429,GR2 ASSN STD 2ND MATERIAL RESPONSE OVERALL
NSN5305-01-467-6450
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 306-16244 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.250 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
•
FASTENER LENGTH: 2.000 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: SAEJ123 ASSN STD 1ST TREATMENT RESPONSE OR ASTMF593,BLACKOXIDEORCHEMICALCOAT ASSN STD 2ND TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 2.000 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: ANSI/ASMEB1.1 ASSN STD 1ST MATERIAL RESPONSE OR SAEJ429,GR2 ASSN STD 2ND MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 0.375 INCHES IN
•
HEAD STYLE: HEXAGON
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.250 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
FASTENER LENGTH2.000 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONSAEJ123 ASSN STD 1ST TREATMENT RESPONSE OR ASTMF593,BLACKOXIDEORCHEMICALCOAT ASSN STD 2ND TREATMENT RESPONSE OVERALL
THREAD LENGTH2.000 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONANSI/ASMEB1.1 ASSN STD 1ST MATERIAL RESPONSE OR SAEJ429,GR2 ASSN STD 2ND MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.375 INCHES IN
HEAD STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
WIDTH BETWEEN FLATS0.592 INCHES MINIMUM AND 0.600 INCHES MAXIMUM IN
SURFACE TREATMENTOXIDE OVERALL
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES 2
M19-21121-D PC134Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
PL-M19-21121-D PC 134Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 306-16244?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 306-16244?
306-16244 is a SCREW,CAP,HEXAGON HEAD.
What parts can replace 306-16244?
There are 2 known substitutes for 306-16244: M19-21121-D PC134, PL-M19-21121-D PC 134. Substitute compatibility should be verified for your specific system.
What is the NSN for 306-16244?
306-16244 is cataloged in the U.S. Government catalog under NSN 5305-01-467-6450. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 306-16244

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.