PartsTable
Technical Data Sheet
Download PDF

305AS-A10134-1 — NUT,PLAIN,PLATE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

305AS-A10134-1: NUT,PLAIN,PLATE.

The NUT,PLAIN,PLATE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: PLATE, nut_height: 0.225 INCHES NOMINAL IN, nut_length: 0.999 INCHES NOMINAL IN, plate_width: 0.625 INCHES NOMINAL IN, thread_class: 2B. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-044-2282, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
305AS-A10134-1
NSN: 5310-01-044-2282
FSC: 5310 — Nuts and Washers
CAGE: 30003 — NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_stylePLATE
nut_height0.225 INCHES NOMINAL IN
nut_length0.999 INCHES NOMINAL IN
plate_width0.625 INCHES NOMINAL IN
thread_class2B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
plate_thickness0.156 INCHES NOMINAL IN
thread_directionRIGHT-HAND
nominal_thread_size0.3125 INCHES IN
nut_mounting_provisionWELDING PROJECTIONS
thread_quantity_per_inch18
NSN5310-01-044-2282
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 305AS-A10134-1 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PLATE THICKNESS: 0.156 INCHES NOMINAL IN
•
NUT LENGTH: 0.999 INCHES NOMINAL IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
PLATE WIDTH: 0.625 INCHES NOMINAL IN
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.3125 INCHES IN
•
NUT HEIGHT: 0.225 INCHES NOMINAL IN
•
WELDING PROJECTION QUANTITY: 2
TECHNICAL CHARACTERISTICS
PLATE THICKNESS0.156 INCHES NOMINAL IN
NUT LENGTH0.999 INCHES NOMINAL IN
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
PLATE WIDTH0.625 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.3125 INCHES IN
NUT HEIGHT0.225 INCHES NOMINAL IN
WELDING PROJECTION QUANTITY2
NUT STYLEPLATE
THREAD CLASS2B
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
XN-2718Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 305AS-A10134-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 305AS-A10134-1?
305AS-A10134-1 is a NUT,PLAIN,PLATE.
What parts can replace 305AS-A10134-1?
There is 1 known substitute for 305AS-A10134-1: XN-2718. Substitute compatibility should be verified for your specific system.
What is the NSN for 305AS-A10134-1?
305AS-A10134-1 is cataloged in the U.S. Government catalog under NSN 5310-01-044-2282. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 305AS-A10134-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.