PartsTable
Technical Data Sheet
Download PDF

30554-72-2113 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

30554-72-2113: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: PAPER OVERALL, hole_diameter: 2.000 INCHES MINIMUM AND 2.100 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 4.000 INCHES NOMINAL IN, overall_length: 5.000 INCHES NOMINAL IN, style_designator: NON-CIRCULAR, cross-sectional_thickness: 0.059 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-009-7229, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
30554-72-2113
NSN: 5330-01-009-7229
FSC: 5330 — Packing and Gasket Materials
CAGE: 36024 — LIBBY POWER SYSTEMS, LLC (USA)
SPECIFICATIONS
materialPAPER OVERALL
hole_diameter2.000 INCHES MINIMUM AND 2.100 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
overall_width4.000 INCHES NOMINAL IN
overall_length5.000 INCHES NOMINAL IN
style_designatorNON-CIRCULAR
bolt_hole_quantity2
cross-sectional_thickness0.059 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationMIL-G-12803,TY 3,GR 2,CL 1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
bolt_hole_centerline_to_nearest_edge_distance0.840 INCHES NOMINAL IN
outside_edge_to_bolt_hole_center_distance_along_length2.000 INCHES NOMINAL IN
center_to_center_distance_between_bolt_holes_along_length3.320 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
NSN5330-01-009-7229
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 30554-72-2113 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.059 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NON-CIRCULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-12803,TY 3,GR 2,CL 1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE: 0.840 INCHES NOMINAL IN
•
BOLT HOLE QUANTITY: 2
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.059 INCHES NOMINAL IN
STYLE DESIGNATORNON-CIRCULAR
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-12803,TY 3,GR 2,CL 1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH5.000 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH4.000 INCHES NOMINAL IN
BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE0.840 INCHES NOMINAL IN
BOLT HOLE QUANTITY2
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH3.320 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH2.000 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 30554-72-2113?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 30554-72-2113?
30554-72-2113 is a GASKET.
What is the NSN for 30554-72-2113?
30554-72-2113 is cataloged in the U.S. Government catalog under NSN 5330-01-009-7229. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 30554-72-2113

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.