PartsTable
Technical Data Sheet
Download PDF

305366 — SEAL,PLAIN ENCASED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

305366: SEAL,PLAIN ENCASED.

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT A, case_style: SQUARE, seal_width: 0.828 INCHES NOMINAL IN, outside_diameter: 7.131 INCHES NOMINAL IN, surface_treatment: PLASTIC CASE, housing_bore_diameter: 7.133 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-740-9696, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
305366
NSN: 5330-00-740-9696
FSC: 5330 — Packing and Gasket Materials
CAGE: 61465 — GARWOOD/FELLER INC GARWOOD WINCH DIV (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEALING ELEMENT A
case_styleSQUARE
seal_width0.828 INCHES NOMINAL IN
outside_diameter7.131 INCHES NOMINAL IN
surface_treatmentPLASTIC CASE
housing_bore_diameter7.133 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter5.875 INCHES NOMINAL IN
NSN5330-00-740-9696
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 305366 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.828 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: ANGULAR
•
OUTSIDE DIAMETER: 7.131 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 7.133 INCHES NOMINAL IN
•
CASE STYLE: SQUARE
•
ACCOMMODATED SHAFT DIAMETER: 5.875 INCHES NOMINAL IN
•
SURFACE TREATMENT: PLASTIC CASE
•
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT A
TECHNICAL CHARACTERISTICS
SEAL WIDTH0.828 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR
OUTSIDE DIAMETER7.131 INCHES NOMINAL IN
HOUSING BORE DIAMETER7.133 INCHES NOMINAL IN
CASE STYLESQUARE
ACCOMMODATED SHAFT DIAMETER5.875 INCHES NOMINAL IN
SURFACE TREATMENTPLASTIC CASE
MATERIALRUBBER SYNTHETIC SEALING ELEMENT A
MATERIALRUBBER SYNTHETIC SEALING ELEMENT B
SUBSTITUTES & CROSS-REFERENCES 5
23602-6914Reference document
Same NSN cross-reference
Reference document — Secondary reference
KC1778Reference document
Same NSN cross-reference
Reference document — Secondary reference
58741Reference document
Same NSN cross-reference
Reference document — Secondary reference
111712R91Reference document
Same NSN cross-reference
Reference document — Secondary reference
35422AReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy 305366?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 305366?
305366 is a SEAL,PLAIN ENCASED.
What parts can replace 305366?
There are 5 known substitutes for 305366: 23602-6914, KC1778, 58741 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 305366?
305366 is cataloged in the U.S. Government catalog under NSN 5330-00-740-9696. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 305366