PartsTable
Technical Data Sheet
305291942 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SPIKE STRIP is a the manufacturer industrial component. Key specifications include special_features: PIN-SHEAR DESIGN HOLDS SPIKES & RELEASING THOSE SPIKES THAT ARE RUN OVER, end_item_identification: SPIKE STRIP, TIRE DEFLATION DEVICE, general_characteristics_item_description: DEPLOYED LENGTH 12 FT; NYLON CASE; CASE DIMENSIONS 19" X 7.25" (ROLLED); 120 SPIKES FT, part_name_assigned_by_controlling_agency: MAGNUM SPIKE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-567-8409, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
305291942
NSN: 5340-01-567-8409
FSC: 5340
CAGE: N4466 — EQUIPNOR AS (NOR)
SPECIFICATIONS
special_featuresPIN-SHEAR DESIGN HOLDS SPIKES & RELEASING THOSE SPIKES THAT ARE RUN OVER
end_item_identificationSPIKE STRIP, TIRE DEFLATION DEVICE
general_characteristics_item_descriptionDEPLOYED LENGTH 12 FT; NYLON CASE; CASE DIMENSIONS 19" X 7.25" (ROLLED); 120 SPIKES FT
part_name_assigned_by_controlling_agencyMAGNUM SPIKE
NSN5340-01-567-8409
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 305291942 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
GENERAL CHARACTERISTICS ITEM DESCRIPTION: DEPLOYED LENGTH 12 FT; NYLON CASE; CASE DIMENSIONS 19" X 7.25" (ROLLED); 120 SPIKES FT
TECHNICAL CHARACTERISTICS (FLIS)
PART NAME ASSIGNED BY CONTROLLING AGENCYMAGNUM SPIKE
END ITEM IDENTIFICATIONSPIKE STRIP, TIRE DEFLATION DEVICE
SPECIAL FEATURESPIN-SHEAR DESIGN HOLDS SPIKES & RELEASING THOSE SPIKES THAT ARE RUN OVER
GENERAL CHARACTERISTICS ITEM DESCRIPTIONDEPLOYED LENGTH 12 FT; NYLON CASE; CASE DIMENSIONS 19" X 7.25" (ROLLED); 120 SPIKES FT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
FFB171Interchangeable
interchangeable cross-reference
interchangeable
MS12Interchangeable
interchangeable cross-reference
interchangeable
RMS10Interchangeable
interchangeable cross-reference
interchangeable
IND1AMS42Interchangeable
interchangeable cross-reference
interchangeable
A-A-3068Interchangeable
interchangeable cross-reference
interchangeable
SS-S-736 TY2CLA1ST6Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 305291942?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 305291942?
305291942 is a SPIKE STRIP.
What parts can replace 305291942?
There are 6 known substitutes for 305291942: FFB171, MS12, RMS10 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 305291942?
305291942 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-567-8409. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 305291942