30504768PC22 — O-RING

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

30504768PC22: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER ETHYLENE-PROPYLENE CLASS EPM, temp_rating: -70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF, hardness_rating: 80.0 SHORE DUROMETER A NOMINAL, outside_diameter: 1.239 INCHES MINIMUM AND 1.271 INCHES MAXIMUM IN, center_hole_diameter: 1.039 INCHES MINIMUM AND 1.059 INCHES MAXIMUM IN, cross-sectional_height: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-942-4440, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

30504768PC22

NSN: 5331-00-942-4440
FSC: 5331 — O-ring
CAGE: 03847 — WARREN CONTROLS, INC. (USA)

SPECIFICATIONS

material	RUBBER ETHYLENE-PROPYLENE CLASS EPM
temp_rating	-70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
hardness_rating	80.0 SHORE DUROMETER A NOMINAL
outside_diameter	1.239 INCHES MINIMUM AND 1.271 INCHES MAXIMUM IN
center_hole_diameter	1.039 INCHES MINIMUM AND 1.059 INCHES MAXIMUM IN
cross-sectional_height	0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
NSN	5331-00-942-4440

COMPONENT DIAGRAM

KEY FEATURES

•

TEMP RATING: -70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF

•

CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN

•

OUTSIDE DIAMETER: 1.239 INCHES MINIMUM AND 1.271 INCHES MAXIMUM IN

•

HARDNESS RATING: 80.0 SHORE DUROMETER A NOMINAL

•

CENTER HOLE DIAMETER: 1.039 INCHES MINIMUM AND 1.059 INCHES MAXIMUM IN

•

MATERIAL: RUBBER ETHYLENE-PROPYLENE CLASS EPM

TECHNICAL CHARACTERISTICS

TEMP RATING	-70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT	0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
OUTSIDE DIAMETER	1.239 INCHES MINIMUM AND 1.271 INCHES MAXIMUM IN
HARDNESS RATING	80.0 SHORE DUROMETER A NOMINAL
CENTER HOLE DIAMETER	1.039 INCHES MINIMUM AND 1.059 INCHES MAXIMUM IN
MATERIAL	RUBBER ETHYLENE-PROPYLENE CLASS EPM

SUBSTITUTES & CROSS-REFERENCES 3

NAS1613Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

2-121 E515-80Reference document

Same NSN cross-reference

Reference document — Secondary reference

2-121E515-8Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required

Ready to buy 30504768PC22?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 30504768PC22?

30504768PC22 is a O-RING.

What parts can replace 30504768PC22?

There are 3 known substitutes for 30504768PC22: NAS1613, 2-121 E515-80, 2-121E515-8. Substitute compatibility should be verified for your specific system.

What is the NSN for 30504768PC22?

30504768PC22 is cataloged in the U.S. Government catalog under NSN 5331-00-942-4440. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

30504768PC22 — O-RING

Request a Quote — 30504768PC22