PartsTable
Technical Data Sheet
Download PDF

30470 — SHAFT,AXLE,AUTOMOTIVE

✓ Government record, cited
Lindy · MRO · MRO_GENERAL
PRODUCT OVERVIEW

30470: SHAFT,AXLE,AUTOMOTIVE.

Can be used as a power extension cable or a computer / monitor / UPS power connection lead IEC C14 to IEC C13 Fully moulded connectors VDE approved Length: 0.5m 10 year warranty These LINDY power cables are perfect for use in professional areas (recording studios, light systems and also for event locations of any kind, etc.) – but you can also use them in private sections. These cables are available in different colours and are ideally suited for structured cabling in server cabinets or wall cabinets. Due to the high temperature resistance from -10 to 70°C during the operation these cables can also be used in non air-conditioned areas.

This part is cataloged in the U.S. Government catalog under NSN 5110-00-260-1705, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
MRO→ MRO_GENERAL→ 30470
NSN: 5110-00-260-1705
NIINs: 002601705, 003953066, 005655042, 006861155, 008254701, 008915670, 013252338, 015593587, 016186921, 016323476
FSC: 5110 — Hand Tools, Edged, Nonpowered
CAGE: 08292 — EASCO HAND TOOLS INC DBA DANAHER TOOL GROUP DIV DANAHER TOOL GROUP EASCO HAND TOOLS INC. (USA)
SPECIFICATIONS
phaseSINGLE
materialSTEEL COMP E52100 INNER RING
shank_typeSTRAIGHT ROUND W/SQUARE END
reamer_typeADJUSTABLE
current_typeAC
flute_designSTRAIGHT
flute_length1.500 INCHES MINIMUM AND 2.000 INCHES MAXIMUM IN
bore_diameter1.5743 INCHES MINIMUM AND 1.5748 INCHES MAXIMUM IN
hole_diameter0.368 INCHES NOMINAL IN
pump_quantity1
seal_quantity2
first_end_typeFLANGED
NSN5110-00-260-1705
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR MFR: Lindy SHAFT,AXLE,AUTOMOTIVE TITLE COMPONENT PN 30470 MFR Lindy SHAFT,AXLE,AUTOMOTIVE
KEY FEATURES
•
ADJUSTMENT RANGE: +0.468 TO 0.531 INCHES IN
•
FLUTE DESIGN: STRAIGHT
•
SHANK TYPE: STRAIGHT ROUND W/SQUARE END
•
FLUTE LENGTH: 1.500 INCHES MINIMUM AND 2.000 INCHES MAXIMUM IN
•
MATERIAL: STEEL
•
REAMER TYPE: ADJUSTABLE
TECHNICAL CHARACTERISTICS
ADJUSTMENT RANGE+0.468 TO 0.531 INCHES IN
FLUTE DESIGNSTRAIGHT
SHANK TYPESTRAIGHT ROUND W/SQUARE END
FLUTE LENGTH1.500 INCHES MINIMUM AND 2.000 INCHES MAXIMUM IN
OVERALL LENGTH4.000 INCHES MINIMUM AND 5.500 INCHES MAXIMUM IN
MATERIALSTEEL
REAMER TYPEADJUSTABLE
SUBSTITUTES & CROSS-REFERENCES 8
GGG-R-180 TY3CL1GRASZAReference document
Same NSN cross-reference
Reference document — Secondary reference
C38552Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
610-0-AReference document
Same NSN cross-reference
Reference document — Secondary reference
A-A-2937Reference document
Same NSN cross-reference
Reference document — Identification reference
43-478-7Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
22764Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 30470?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 30470?
30470 is a SHAFT,AXLE,AUTOMOTIVE manufactured by Lindy. It is classified as a MRO (MRO_GENERAL).
What parts can replace 30470?
There are 8 known substitutes for 30470: GGG-R-180 TY3CL1GRASZA, C38552, 610-0-A and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 30470?
30470 is cataloged in the U.S. Government catalog under NSN 5110-00-260-1705. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 30470