30447: BREECH END,RIFLE BARREL.
Note: Cables with IEC C13 sockets such as this are sometimes known by the generic term 'kettle lead'. Even though this term is commonly used, technically it is incorrect as a kettle requires special IEC C15/16 connectors rated at 120 degrees. So, although they look similar, a 'real' kettle lead features a connector with a cut out on the top.
Standard IEC C13 cables cannot be plugged into kettles! This part is cataloged in the U.S. Government catalog under NSN 2530-00-030-2669, indicating validated use in U.S.
government and defense logistics supply chains.
| material | IRON CAST OVERALL |
| cooling_fin | NOT INCLUDED |
| balancing_pad | NOT INCLUDED |
| overall_width | 3.970 INCHES MINIMUM AND 4.030 INCHES MAXIMUM IN |
| oil_drain_hole | NOT INCLUDED |
| adjustment_hole | NOT INCLUDED |
| inspection_hole | NOT INCLUDED |
| center_hole_diameter | 4.000 INCHES MINIMUM AND 4.010 INCHES MAXIMUM IN |
| braking_surface_width | 2.105 INCHES MINIMUM AND 2.145 INCHES MAXIMUM IN |
| mounting_hole_spacing | EQUALLY SPACED ON 5.5 IN. BOLT CIRCLE IN |
| mounting_hole_diameter | 0.528 INCHES MINIMUM AND 0.533 INCHES MAXIMUM IN |
| mounting_hole_quantity | 5 |
| NSN | 2530-00-030-2669 |
| MOUNTING HOLE QUANTITY | 5 |
| ADJUSTMENT HOLE | NOT INCLUDED |
| BALANCING PAD | NOT INCLUDED |
| MOUNTING HOLE SPACING | EQUALLY SPACED ON 5.5 IN. BOLT CIRCLE IN |
| BRAKING SURFACE WIDTH | 2.105 INCHES MINIMUM AND 2.145 INCHES MAXIMUM IN |
| INSPECTION HOLE | NOT INCLUDED |
| MOUNTING HOLE DIAMETER | 0.528 INCHES MINIMUM AND 0.533 INCHES MAXIMUM IN |
| OVERALL WIDTH | 3.970 INCHES MINIMUM AND 4.030 INCHES MAXIMUM IN |
| OVERALL OUTSIDE DIAMETER | 10.375 INCHES NOMINAL IN |
| BRAKING SURFACE LOCATION | INTERNAL |
No substitute or cross-reference records for this part.