PartsTable
Technical Data Sheet
Download PDF

3043T41 — BOLT,U

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

3043T41: BOLT,U.

The BOLT,U is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, thread_class: 3A A, style_designator: ROUND BEND, surface_treatment: ZINC OVERALL, end_item_identification: 3990-01-444-5196 CEMENT MIXER, nominal_thread_diameter: 0.375 INCHES IN. This part is cataloged in the U.S.

Government catalog under NSN 5306-00-272-3652, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3043T41
NSN: 5306-00-272-3652
FSC: 5306 — Bolts
CAGE: 39428 — MCMASTER-CARR SUPPLY CO (USA)
SPECIFICATIONS
materialSTEEL OVERALL
thread_class3A A
style_designatorROUND BEND
surface_treatmentZINC OVERALL
end_item_identification3990-01-444-5196 CEMENT MIXER
nominal_thread_diameter0.375 INCHES IN
thread_quantity_per_inch16
thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
inside_distance_between_shanks2.500 INCHES NOMINAL IN
distance_from_inside_center_of_bend_to_bolt_end3.125 INCHES NOMINAL IN
NSN5306-00-272-3652
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 3043T41 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INSIDE DISTANCE BETWEEN SHANKS: 2.500 INCHES NOMINAL IN
•
DISTANCE FROM INSIDE CENTER OF BEND TO BOLT END: 3.125 INCHES NOMINAL IN
•
STYLE DESIGNATOR: ROUND BEND
•
NOMINAL THREAD DIAMETER: 0.375 INCHES IN
•
SURFACE TREATMENT: ZINC OVERALL
•
THREAD CLASS: 3A A
•
THREAD QUANTITY PER INCH: 16
TECHNICAL CHARACTERISTICS
INSIDE DISTANCE BETWEEN SHANKS2.500 INCHES NOMINAL IN
DISTANCE FROM INSIDE CENTER OF BEND TO BOLT END3.125 INCHES NOMINAL IN
STYLE DESIGNATORROUND BEND
NOMINAL THREAD DIAMETER0.375 INCHES IN
SURFACE TREATMENTZINC OVERALL
THREAD CLASS3A A
END ITEM IDENTIFICATION3990-01-444-5196 CEMENT MIXER
THREAD QUANTITY PER INCH16
MATERIALSTEEL OVERALL
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
SUBSTITUTES & CROSS-REFERENCES 1
1932-029Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 3043T41?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3043T41?
3043T41 is a BOLT,U.
What parts can replace 3043T41?
There is 1 known substitute for 3043T41: 1932-029. Substitute compatibility should be verified for your specific system.
What is the NSN for 3043T41?
3043T41 is cataloged in the U.S. Government catalog under NSN 5306-00-272-3652. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3043T41

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.