PartsTable
Technical Data Sheet
PartsTable / MRO / 30412
30412 ✓ Verified by PartsTable
Lindy · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

Power cable for notebooks, Swiss plug - IEC-320 C5 (Mickey Mouse) coupling. Key specifications include height: 0.937 INCHES NOMINAL IN, length: 12.000 FEET NOMINAL FT, material: STEEL OVERALL, body_style: W/O MTG FACILITIES, AXIAL TERMINALS, bore_shape: STRAIGHT, drive_type: DIRECT. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-8153, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 30412
NSN: 3110-00-156-8153
FSC: 3110
CAGE: 43334 — GENERAL MOTORS CORP DELCO MORAINE NDH DIV (USA)
SPECIFICATIONS
height0.937 INCHES NOMINAL IN
length12.000 FEET NOMINAL FT
materialSTEEL OVERALL
body_styleW/O MTG FACILITIES, AXIAL TERMINALS
bore_shapeSTRAIGHT
drive_typeDIRECT
scale_typeLINEAR ALL SCALES
shaft_typeROUND, FLATTED SINGLE ACTUATOR
body_length1.125 INCHES NOMINAL IN
flat_height0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM SINGLE ACTUATOR IN
temp_rating-40.0 FAHRENHEIT AND 300.0 FAHRENHEIT SINGLE RESPONSE DEGF
shaft_length0.692 INCHES NOMINAL SINGLE ACTUATOR IN
NSN3110-00-156-8153
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 30412 · Lindy ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LOAD DIRECTION: ANGULAR
•
SURFACE FINISH: GROUND
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
CONTACT ANGLE: 25.0 DEGREES MINIMUM
•
MATERIAL: STEEL OVERALL
•
NONDEFINITIVE SPEC/STD DATA: 134 TYPE AND 00 GRADE
•
STYLE DESIGNATOR: COUNTERBORED OUTER RING, NON-SEPARABLE
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
LOAD DIRECTIONANGULAR
SURFACE FINISHGROUND
STANDARD TOLERANCE DESIGNATIONABEC NO.1
CONTACT ANGLE25.0 DEGREES MINIMUM
MATERIALSTEEL OVERALL
NONDEFINITIVE SPEC/STD DATA134 TYPE AND 00 GRADE
STYLE DESIGNATORCOUNTERBORED OUTER RING, NON-SEPARABLE
CONTACT ANGLE25.0 DEGREES MINIMUM
BORE DIAMETER60.00 MILLIMETERS NOMINAL MM
OVERALL OUTSIDE DIAMETER150.00 MILLIMETERS NOMINAL MM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
741-2Interchangeable
interchangeable cross-reference
interchangeable
GW810BS1Interchangeable
interchangeable cross-reference
interchangeable
949812-2Interchangeable
interchangeable cross-reference
interchangeable
3041-2Interchangeable
interchangeable cross-reference
interchangeable
16X7412Interchangeable
interchangeable cross-reference
interchangeable
BB21747Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 30412?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 30412?
30412 is a CAPACITOR,FIXED,PAPER DIELECTRIC manufactured by Lindy. It is classified as a MRO (MRO_GENERAL).
What parts can replace 30412?
There are 23 known substitutes for 30412: 741-2, GW810BS1, 949812-2 and 20 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 30412?
30412 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-8153. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 30412

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026