PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 30407
30407 ✓ Verified by PartsTable
Lindy · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

LINDY power cables are perfect for use in professional areas (recording studios, light systems and also for event locations of any kind, etc.) – but you can also use them in private sections. <br>  <br>Due to the high temperature resistance from -10 to 70°C during operation these cables can also be used in non air-conditioned areas. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-8041, indicating validated use in U.S.

government and defense logistics supply chains.

WHERE IT FITS
30407
NSN: 3110-00-156-8041
FSC: 3110
CAGE: 43334 — GENERAL MOTORS CORP DELCO MORAINE NDH DIV (USA)
SPECIFICATIONS
materialSTEEL OVERALL
body_width3.938 INCHES NOMINAL IN
bore_shapeSTRAIGHT
body_height4.531 INCHES NOMINAL IN
body_length4.781 INCHES NOMINAL IN
constructionSLOT WOUND
bore_diameter35.00 MILLIMETERS NOMINAL MM
contact_angle25.0 DEGREES MINIMUM
overall_width33.000 INCHES NOMINAL IN
inclosure_typeFULLY INCLOSED
load_directionANGULAR
overall_height24.000 INCHES NOMINAL IN
NSN3110-00-156-8041
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 30407 · Lindy ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: GROUND
•
CONTACT ANGLE: 25.0 DEGREES MINIMUM
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
LUBRICATION MATERIAL: LUBRICANT
•
LOAD DIRECTION: ANGULAR
•
BORE SHAPE: STRAIGHT
•
STYLE DESIGNATOR: COUNTERBORED OUTER RING, NON-SEPARABLE
•
NONDEFINITIVE SPEC/STD DATA: 134 TYPE AND 00 GRADE
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE FINISHGROUND
CONTACT ANGLE25.0 DEGREES MINIMUM
STANDARD TOLERANCE DESIGNATIONABEC NO.1
LUBRICATION MATERIALLUBRICANT
LOAD DIRECTIONANGULAR
BORE SHAPESTRAIGHT
STYLE DESIGNATORCOUNTERBORED OUTER RING, NON-SEPARABLE
NONDEFINITIVE SPEC/STD DATA134 TYPE AND 00 GRADE
MATERIALSTEEL OVERALL
OVERALL OUTSIDE DIAMETER100.00 MILLIMETERS NOMINAL MM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
7407Interchangeable
interchangeable cross-reference
interchangeable
407WDInterchangeable
interchangeable cross-reference
interchangeable
5BBS0407Interchangeable
interchangeable cross-reference
interchangeable
30600Interchangeable
interchangeable cross-reference
interchangeable
B8Interchangeable
interchangeable cross-reference
interchangeable
PP-4606C/GInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 30407?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 30407?
30407 is a RESISTOR NETWORK,FIXED,WIRE WOUN manufactured by Lindy.
What parts can replace 30407?
There are 19 known substitutes for 30407: 7407, 407WD, 5BBS0407 and 16 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 30407?
30407 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-8041. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 30407

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026