PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 3040-7
3040-7 ✓ Verified by PartsTable
Lindy · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

LINDY power cables are perfect for use in professional areas (recording studios, light systems and also for event locations of any kind, etc.) – but you can also use them in private sections. <br>  <br>Due to the high temperature resistance from -10 to 70°C during operation these cables can also be used in non air-conditioned areas. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-8041, indicating validated use in U.S.

government and defense logistics supply chains.

WHERE IT FITS
3040-7
NSN: 3110-00-156-8041
FSC: 3110
CAGE: 43334 — GENERAL MOTORS CORP DELCO MORAINE NDH DIV (USA)
SPECIFICATIONS
materialSTEEL OVERALL
body_width3.938 INCHES NOMINAL IN
bore_shapeSTRAIGHT
body_height4.531 INCHES NOMINAL IN
body_length4.781 INCHES NOMINAL IN
constructionSLOT WOUND
bore_diameter35.00 MILLIMETERS NOMINAL MM
contact_angle25.0 DEGREES MINIMUM
overall_width33.000 INCHES NOMINAL IN
inclosure_typeFULLY INCLOSED
load_directionANGULAR
overall_height24.000 INCHES NOMINAL IN
NSN3110-00-156-8041
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 3040-7 · Lindy ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: GROUND
•
CONTACT ANGLE: 25.0 DEGREES MINIMUM
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
LUBRICATION MATERIAL: LUBRICANT
•
LOAD DIRECTION: ANGULAR
•
BORE SHAPE: STRAIGHT
•
STYLE DESIGNATOR: COUNTERBORED OUTER RING, NON-SEPARABLE
•
NONDEFINITIVE SPEC/STD DATA: 134 TYPE AND 00 GRADE
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE FINISHGROUND
CONTACT ANGLE25.0 DEGREES MINIMUM
STANDARD TOLERANCE DESIGNATIONABEC NO.1
LUBRICATION MATERIALLUBRICANT
LOAD DIRECTIONANGULAR
BORE SHAPESTRAIGHT
STYLE DESIGNATORCOUNTERBORED OUTER RING, NON-SEPARABLE
NONDEFINITIVE SPEC/STD DATA134 TYPE AND 00 GRADE
MATERIALSTEEL OVERALL
OVERALL OUTSIDE DIAMETER100.00 MILLIMETERS NOMINAL MM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
7407Interchangeable
interchangeable cross-reference
interchangeable
407WDInterchangeable
interchangeable cross-reference
interchangeable
5BBS0407Interchangeable
interchangeable cross-reference
interchangeable
30600Interchangeable
interchangeable cross-reference
interchangeable
B8Interchangeable
interchangeable cross-reference
interchangeable
PP-4606C/GInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 3040-7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3040-7?
3040-7 is a RESISTOR NETWORK,FIXED,WIRE WOUN manufactured by Lindy.
What parts can replace 3040-7?
There are 19 known substitutes for 3040-7: 7407, 407WD, 5BBS0407 and 16 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 3040-7?
3040-7 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-8041. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3040-7

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026