The Gearshaft,bevel, cataloged under National Stock Number 3040-01-354-0532, is classified within Federal Supply Class 3040 (Miscellaneous Power Transmission Equipment) of the Mechanical Power Transmission Equipment group. The manufacturer of record is Naval Sea Systems Command. Government technical data includes 17 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 3040-01-354-0532 |
| Primary Part Number | 803-5959305-MAXXX-77,78,103 |
| Item Name | Gearshaft,bevel |
| FSC / FSG | 3040 / 30 — Miscellaneous Power Transmission Equipment |
| Manufacturer | Naval Sea Systems Command |
| Status | ACTIVE |
| Shaft Type | SHOULDERED |
| Shaft Material | STEEL |
| Shaft Largest Diameter | 6.000 INCHES NOMINAL IN |
| Shaft End Size | 3.500 INCHES AND 2.347 INCHES IN |
| Teeth Quantity | 38 |
| Pitch Angle | 71.1166 DEGREES |
| Diametral Pitch | 6 |
| Teeth Type | STRAIGHT |
| Gear Outside Diameter | 6.399 INCHES NOMINAL IN |
| Longer Shaft Segment Length | 8.317 INCHES NOMINAL IN |
| Hardness Rating | 58.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM GEAR |
| Gear Material | STEEL |
| Shaft Length | 9.880 INCHES NOMINAL IN |
| Shaft End Type | PLAIN AND SPLINED INVOLUTE, INTERNAL |
| Gear Location on Shaft | OFF CENTER BETWEEN ENDS OF SHAFT |
| Pressure Angle | 22.5000 DEGREES |
| Face Width | 0.750 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 803-5959305-MAXXX-77,78,103 PRIMARY | Naval Sea Systems Command (USA) |
| Reference | Meaning |
|---|---|
| 803-5959305 | D/9 Drawing number reference only Naval Sea Systems Command |
NSN 3040-01-354-0532 is a Gearshaft,bevel, manufactured by Naval Sea Systems Command, classified under FSC 3040, Miscellaneous Power Transmission Equipment. Status: active.
NSN 3040-01-354-0532 has 1 manufacturer part number on file: 803-5959305-MAXXX-77,78,103 (Naval Sea Systems Command).
1 possible match (shared part number, not a government interchangeability claim): 4820-01-356-3648. Verify interchangeability with system specifications before substitution.
Key specifications for 803-5959305-MAXXX-77,78,103: Shaft Type: SHOULDERED; Shaft Material: STEEL; Shaft Largest Diameter: 6.000 INCHES NOMINAL IN; Shaft End Size: 3.500 INCHES AND 2.347 INCHES IN. 17 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.