The Shaft,shouldered, cataloged under National Stock Number 3040-01-338-5893, is classified within Federal Supply Class 3040 (No Item Name Available) of the Mechanical Power Transmission Equipment group. The primary manufacturer of record is Parker Hannifin Corporation Div Hydraulic Systems Division. Government technical data includes 20 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 1 commercial cross-reference from 1 manufacturer, enabling identification through both NSN and commercial part number lookups. 2 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 3040-01-338-5893 |
| Primary Part Number | 58648 |
| Item Name | Shaft,shouldered |
| FSC / FSG | 3040 / 30 — No Item Name Available |
| Manufacturer | Parker Hannifin Corporation Div Hydraulic Systems Division |
| Status | ACTIVE |
| First End Spline Minor Diameter | 0.3250 INCHES MINIMUM AND 0.3340 INCHES MAXIMUM IN |
| Second End Spline Minor Diameter | 0.3950 INCHES MINIMUM AND 0.4040 INCHES MAXIMUM IN |
| Second End Spline Quantity | 11 |
| Second End Spline Major Diameter | 0.4970 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN |
| Material Document and Classification | AMS5643 CLASS 17-4PH ASSN STD SINGLE MATERIAL RESPONSE |
| First End Spline Quantity | 12 |
| Second End Pitch Diameter | 0.4580 INCHES NOMINAL IN |
| Second End Spline Length | 0.637 INCHES MINIMUM AND 0.663 INCHES MAXIMUM IN |
| First End Pressure Angle | 30.0 DEGREES NOMINAL |
| First End Spline Length | 0.474 INCHES MINIMUM AND 0.490 INCHES MAXIMUM IN |
| Largest Step Diameter | 0.279 INCHES NOMINAL IN |
| Second End Pressure Angle | 30.0 DEGREES NOMINAL |
| End Similarity | IDENTICAL |
| First End Spline Major Diameter | 0.4030 INCHES MINIMUM AND 0.4060 INCHES MAXIMUM IN |
| Material | STEEL CORROSION RESISTING |
| First End Pitch Diameter | 0.3750 INCHES NOMINAL IN |
| Step Quantity | 1 |
| Second End Diameter | 0.4970 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN |
| First End Diameter | 0.4030 INCHES MINIMUM AND 0.4060 INCHES MAXIMUM IN |
| First End Style | SPLINED (INVOLUTE) |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| 58648 PRIMARY | Parker Hannifin Corporation Div Hydraulic Systems Division (USA) |
NSN 3040-01-338-5893 is a Shaft,shouldered, manufactured by Parker Hannifin Corporation Div Hydraulic Systems Division, classified under FSC 3040 (No Item Name Available). Status: active.
NSN 3040-01-338-5893 has 1 cross-referenced part number: 58648 (Parker Hannifin Corporation Div Hydraulic Systems Division).
There are 2 known substitutes for 3040-01-338-5893: 6220-00-774-4704, 5330-01-303-0174. Verify interchangeability with system specifications before substitution.
Key specifications for 58648: First End Spline Minor Diameter: 0.3250 INCHES MINIMUM AND 0.3340 INCHES MAXIMUM IN; Second End Spline Minor Diameter: 0.3950 INCHES MINIMUM AND 0.4040 INCHES MAXIMUM IN; Second End Spline Quantity: 11; Second End Spline Major Diameter: 0.4970 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN. 21 total characteristics are documented in the Federal Logistics Information System.