The Lever,remote Control, cataloged under National Stock Number 3040-00-943-3418, is classified within Federal Supply Class 3040 (Miscellaneous Power Transmission Equipment) of the Mechanical Power Transmission Equipment group. Government technical data includes 10 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 3040-00-943-3418 |
| Item Name | Lever,remote Control |
| FSC / FSG | 3040 / 30 — Miscellaneous Power Transmission Equipment |
| Status | ACTIVE |
| Link End Thickness | 0.750 INCHES NOMINAL IN |
| Link End Hole Diameter | 0.250 INCHES MINIMUM AND 0.251 INCHES MAXIMUM IN |
| Shaft End Thickness | 0.750 INCHES NOMINAL IN |
| Material Document and Classification | QQ-A-225/9, COMP 7075-T6 FED SPEC SINGLE MATERIAL RESPONSE |
| Bore Type | SERRATED |
| Distance Between Fork Inside Spread | 0.490 INCHES NOMINAL IN |
| Center to Center Distance Between Link and Shaft Holes | 4.160 INCHES MINIMUM AND 4.180 INCHES MAXIMUM IN |
| Serration Quantity | 26 |
| Minor Diameter | 0.396 INCHES MINIMUM AND 0.398 INCHES MAXIMUM IN |
| Material | ALUMINUM ALLOY |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 90-2252-3 | 3/2 Design control — primary reference U.S. Government activity |
NSN 3040-00-943-3418 is a Lever,remote Control, classified under FSC 3040, Miscellaneous Power Transmission Equipment. Status: active.
1 possible match (shared part number, not a government interchangeability claim): 4330-01-199-3098. Verify interchangeability with system specifications before substitution.
Key specifications for 3040-00-943-3418: Link End Thickness: 0.750 INCHES NOMINAL IN; Link End Hole Diameter: 0.250 INCHES MINIMUM AND 0.251 INCHES MAXIMUM IN; Shaft End Thickness: 0.750 INCHES NOMINAL IN; Material Document and Classification: QQ-A-225/9, COMP 7075-T6 FED SPEC SINGLE MATERIAL RESPONSE. 10 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.