The Gearshaft,helical, cataloged under National Stock Number 3040-00-734-6825, is classified within Federal Supply Class 3040 (Miscellaneous Power Transmission Equipment) of the Mechanical Power Transmission Equipment group. The manufacturer of record is Meritor Industrial Products, Llc. Government technical data includes 17 specifications, cited from the U.S. Government catalog. The record lists 3 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. 5 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 3040-00-734-6825 |
| Primary Part Number | 3891T748 |
| Item Name | Gearshaft,helical |
| FSC / FSG | 3040 / 30 — Miscellaneous Power Transmission Equipment |
| Manufacturer | Meritor Industrial Products, Llc |
| Status | ACTIVE |
| Shaft Type | SHOULDERED |
| Shaft Material | STEEL |
| Helix Angle | 22.6053 DEGREES |
| Shaft Largest Diameter | 2.620 INCHES NOMINAL IN |
| Shaft End Size | 2.495 INCHES AND 2.251 INCHES IN |
| Teeth Quantity | 16 |
| Tooth Direction | LEFT |
| Diametral Pitch | 3.6421 |
| Teeth Type | SINGLE HELIX |
| Gear Outside Diameter | 5.365 INCHES MINIMUM AND 5.375 INCHES MAXIMUM IN |
| Longer Shaft Segment Length | 3.190 INCHES NOMINAL IN |
| Gear Material | STEEL |
| Shaft Length | 9.160 INCHES NOMINAL IN |
| Shaft End Type | KEYWAY WOODRUFF AND THREADED INTERNAL |
| Gear Location on Shaft | OFF CENTER BETWEEN ENDS OF SHAFT |
| Pressure Angle | 18.5563 DEGREES |
| Face Width | 3.163 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 3891T748 PRIMARY | Meritor Industrial Products, Llc (USA) |
| 7346825 | U S Army Tank Automotive Command Amsta-Im-Mm (USA) |
| 3891T748 | Meritor Heavy Vehicle Systems, Llc (USA) |
| Reference | Meaning |
|---|---|
| KC5296 | 5/9 Secondary reference Diamond Reo Truck Co |
| 3020007346825 | 5/9 Secondary reference E.c.a Etablissement Centrald'approvisionnement Des Forces Armee |
| 98693R1 | 5/9 Secondary reference Navistar International Corporation Dba Navistar |
| 98693R1 | 5/9 Secondary reference U.S. Government activity |
| 98683R3 | 3/2 Design control — primary reference U.S. Government activity |
NSN 3040-00-734-6825 is a Gearshaft,helical, manufactured by Meritor Industrial Products, Llc, classified under FSC 3040, Miscellaneous Power Transmission Equipment. Status: active.
NSN 3040-00-734-6825 has 3 manufacturer part numbers on file: 3891T748 (Meritor Industrial Products, Llc), 7346825 (U S Army Tank Automotive Command Amsta-Im-Mm), 3891T748 (Meritor Heavy Vehicle Systems, Llc).
Key specifications for 3891T748: Shaft Type: SHOULDERED; Shaft Material: STEEL; Helix Angle: 22.6053 DEGREES; Shaft Largest Diameter: 2.620 INCHES NOMINAL IN. 17 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.