The Collar,shaft, cataloged under National Stock Number 3040-00-727-5054, is classified within Federal Supply Class 3040 (Miscellaneous Power Transmission Equipment) of the Mechanical Power Transmission Equipment group. Government technical data includes 12 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. 1 item shares a part number with this NSN in the catalog (possible match — not a government interchangeability claim). Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 3040-00-727-5054 |
| Item Name | Collar,shaft |
| FSC / FSG | 3040 / 30 — Miscellaneous Power Transmission Equipment |
| Status | ACTIVE |
| Securing Hole Type and Location | UNTHREADED SINGLE HOLE |
| Largest Diameter Length | 0.131 INCHES NOMINAL IN |
| Style Designator | ROUND W/SINGLE CHAMFER |
| Material Document and Classification | QQ-A-225/8, ALLOY 6061, T6 FED SPEC SINGLE MATERIAL RESPONSE |
| Outside Diameter | 0.450 INCHES MINIMUM AND 0.460 INCHES MAXIMUM IN |
| Hole Diameter and Location | 0.0625 INCHES NOMINAL SINGLE HOLE IN |
| Angle Between Centerlines of Securing Holes in Deg | 180.0 |
| Securing Hole Quantity | 2 |
| Chamfer Angle in Deg | 45.0 |
| Bore Diameter | 0.1895 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM IN |
| Material | ALUMINUM ALLOY 6061 |
| Thickness | 0.200 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| E4684 | 3/2 Design control — primary reference U.S. Government activity |
NSN 3040-00-727-5054 is a Collar,shaft, classified under FSC 3040, Miscellaneous Power Transmission Equipment. Status: active.
1 possible match (shared part number, not a government interchangeability claim): 4320-01-434-3435. Verify interchangeability with system specifications before substitution.
Key specifications for 3040-00-727-5054: Securing Hole Type and Location: UNTHREADED SINGLE HOLE; Largest Diameter Length: 0.131 INCHES NOMINAL IN; Style Designator: ROUND W/SINGLE CHAMFER; Material Document and Classification: QQ-A-225/8, ALLOY 6061, T6 FED SPEC SINGLE MATERIAL RESPONSE. 12 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.