The Shaft Assembly,flexible, cataloged under National Stock Number 3040-00-618-2141, is classified within Federal Supply Class 3040 (Miscellaneous Power Transmission Equipment) of the Mechanical Power Transmission Equipment group. Government technical data includes 29 specifications, cited from the U.S. Government catalog. 3 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 3040-00-618-2141 |
| Item Name | Shaft Assembly,flexible |
| FSC / FSG | 3040 / 30 — Miscellaneous Power Transmission Equipment |
| Status | ACTIVE |
| Width Across Flats | 0.875 INCHES MINIMUM AND 0.875 INCHES MINIMUM AND 1.000 INCHES MAXIMUM BOTH ENDS1.000 INCHES MAXIMUM BOTH ENDS IN |
| Spline Type | INVOLUTE BOTH ENDSINVOLUTE BOTH ENDS |
| Cross Section Size and Location | 0.313 INCHES MINIMUM DIAMETER BOTH ENDS0.313 INCHES MINIMUM DIAMETER BOTH ENDS IN |
| End Overall Diameter | 0.531 INCHES NOMINAL BOTH ENDS0.531 INCHES NOMINAL BOTH ENDS IN |
| End Connection Type | UNION FERRULE BOTH ENDSUNION FERRULE BOTH ENDS |
| Spline Length | 0.437 INCHES MINIMUM AND 0.437 INCHES MINIMUM AND 0.750 INCHES MAXIMUM BOTH ENDS0.750 INCHES MAXIMUM BOTH ENDS IN |
| Thread Depth | 0.266 INCHES MINIMUM AND 0.266 INCHES MINIMUM AND 0.328 INCHES MAXIMUM BOTH ENDS0.328 INCHES MAXIMUM BOTH ENDS IN |
| Pitch Diameter | 0.292 INCHES NOMINAL BOTH ENDS0.292 INCHES NOMINAL BOTH ENDS IN |
| Spline Major Diameter | 0.312 INCHES MINIMUM AND 0.312 INCHES MINIMUM AND 0.336 INCHES MAXIMUM BOTH ENDS0.336 INCHES MAXIMUM BOTH ENDS IN |
| Thread Location | INTERNAL BOTH ENDSINTERNAL BOTH ENDS |
| Core Diameter | 0.375 INCHES NOMINAL0.375 INCHES NOMINAL IN |
| Torsional Deflection Rating | 12 DEG FT LB IN. TORSIONAL DEFLICTION RATING WINDING 16 DEG FT LB IN. TORSIONAL DEFLECTION RATING UNWINDING12 DEG FT LB IN. TORSIONAL DEFLICTION RATING WINDING 16 DEG FT LB IN. TORSIONAL DEFLECTION RATING UNWINDING |
| Thread Direction | RIGHT-HAND BOTH ENDSRIGHT-HAND BOTH ENDS |
| Spline Pressure Angle in Deg | 30.0 BOTH ENDS30.0 BOTH ENDS |
| Spline Quantity | 14 BOTH ENDS14 BOTH ENDS |
| Casing Length Between Ferrules | 42.433 INCHES NOMINAL42.433 INCHES NOMINAL IN |
| Core Rotation Direction | CLOCKWISECLOCKWISE |
| Core Removability | NONREMOVABLENONREMOVABLE |
| Core Overall Length | 44.215 INCHES NOMINAL44.215 INCHES NOMINAL IN |
| Screw Thread Series Designator | UNEF BOTH ENDSUNEF BOTH ENDS |
| Surface Treatment | RUBBER CHLOROPRENE CLASS CR CASINGRUBBER CHLOROPRENE CLASS CR CASING |
| Thread Class | 3B BOTH ENDS3B BOTH ENDS |
| Wrenching Facility Type | HEXAGON BOTH ENDSHEXAGON BOTH ENDS |
| Material | STEEL CASINGSTEEL CASING |
| Material | STEEL CORESTEEL CORE |
| Casing Outside Diameter | 0.790 INCHES NOMINAL0.790 INCHES NOMINAL IN |
| Minimum Operating Radius | 18.000 INCHES18.000 INCHES IN |
| End Type | ROUND, INTERNAL SPLINED BOTH ENDSROUND, INTERNAL SPLINED BOTH ENDS |
| Tip Length | 0.879 INCHES MINIMUM AND 0.879 INCHES MINIMUM AND 1.000 INCHES MAXIMUM BOTH ENDS1.000 INCHES MAXIMUM BOTH ENDS IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 127669-042-16 | 5/9 Secondary reference Ge Aviation Systems Llc |
| 127669-042-16 | C/1 Advisory reference — outside the item-of-supply concept Safran Power Usa Llc |
| 127669-042-16 | 3/9 Design control — primary reference Lucas Aerospace Power Equipment Corporation |
NSN 3040-00-618-2141 is a Shaft Assembly,flexible, classified under FSC 3040, Miscellaneous Power Transmission Equipment. Status: active.
Key specifications for 3040-00-618-2141: Width Across Flats: 0.875 INCHES MINIMUM AND 0.875 INCHES MINIMUM AND 1.000 INCHES MAXIMUM BOTH ENDS1.000 INCHES MAXIMUM BOTH ENDS IN; Spline Type: INVOLUTE BOTH ENDSINVOLUTE BOTH ENDS; Cross Section Size and Location: 0.313 INCHES MINIMUM DIAMETER BOTH ENDS0.313 INCHES MINIMUM DIAMETER BOTH ENDS IN; End Overall Diameter: 0.531 INCHES NOMINAL BOTH ENDS0.531 INCHES NOMINAL BOTH ENDS IN. 29 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.