PartsTable TECHNICAL DATA SHEET
NSN 3040-00-613-9096Government record, cited

Worm Shaft3040-00-613-9096

NSN 3040-00-613-9096 · NIIN 006139096 · Part number 6139096
Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate · FSC 3040 — Miscellaneous Power Transmission Equipment · FSG 30 — Mechanical Power Transmission Equipment · CAGE 19200
Government record, cited
NSN 3040-00-613-9096 — this item is cataloged by the U.S. Government under National Stock Number 3040-00-613-9096. Manufacturer of record part number: 6139096.
Also searched as  3040-00-613-9096 · 3040006139096 · NIIN 006139096 · 00-613-9096 · FSC 3040 Miscellaneous Power Transmission Equipment · CAGE 19200 · 6139096
Nearby stock numbers  ·
Features
  • Worm Shaft — FSC 3040
  • Shaft Location: BOTH ENDS OF WORM
  • FSC Application Data: MOUNT,TELESCOPE,ANTIAIRCRAFT FIRE CONTROL EQUIPMENT
  • Teeth Hardness Rating: 30.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM
  • Worm Body Length: 1.375 INCHES NOMINAL IN
  • Worm Thread Lead: 0.250 INCHES NOMINAL IN
  • Thread Length: 0.290 INCHES NOMINAL SECOND END EIGHTH PORTION IN
  • Worm Pitch Diameter: 0.861 INCHES NOMINAL IN
Identification
  • NSN: 3040-00-613-9096
  • NIIN: 006139096
  • FSC: 3040 — Miscellaneous Power Transmission Equipment
  • FSG: 30 — Mechanical Power Transmission Equipment
  • Primary part number: 6139096
  • Manufacturer: Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate
General Description

The Worm Shaft, cataloged under National Stock Number 3040-00-613-9096, is classified within Federal Supply Class 3040 (Miscellaneous Power Transmission Equipment) of the Mechanical Power Transmission Equipment group. The manufacturer of record is Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate. Government technical data includes 29 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN3040-00-613-9096
Primary Part Number6139096
Item NameWorm Shaft
FSC / FSG3040 / 30 — Miscellaneous Power Transmission Equipment
ManufacturerCombat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate
StatusACTIVE
Shaft LocationBOTH ENDS OF WORM
FSC Application DataMOUNT,TELESCOPE,ANTIAIRCRAFT FIRE CONTROL EQUIPMENT
Teeth Hardness Rating30.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM
Worm Body Length1.375 INCHES NOMINAL IN
Worm Thread Lead0.250 INCHES NOMINAL IN
Thread Length0.290 INCHES NOMINAL SECOND END EIGHTH PORTION IN
Worm Pitch Diameter0.861 INCHES NOMINAL IN
Worm Outside Diameter1.020 INCHES NOMINAL IN
Straight Unthreaded Section Diameter0.312 INCHES NOMINAL SECOND END SEVENTH PORTION IN
Straight Unthreaded Section Diameter0.433 INCHES NOMINAL SECOND END FIFTH PORTION IN
Straight Unthreaded Section Diameter0.4372 INCHES NOMINAL FIRST END SECOND PORTION IN
Straight Unthreaded Section Diameter0.4372 INCHES NOMINAL SECOND END SIXTH PORTION IN
Straight Unthreaded Section Diameter0.450 INCHES NOMINAL SECOND END SECOND PORTION IN
Straight Unthreaded Section Diameter0.460 INCHES NOMINAL FIRST END FIRST PORTION IN
Straight Unthreaded Section Diameter0.500 INCHES NOMINAL SECOND END FOURTH PORTION IN
Straight Unthreaded Section Diameter0.625 INCHES NOMINAL SECOND END FIRST PORTION IN
Straight Unthreaded Section Diameter0.9375 INCHES NOMINAL SECOND END THIRD PORTION IN
Unthreaded Section Keyway Depth0.0772 INCHES NOMINAL SECOND END SIXTH PORTION IN
End SimilarityNOT IDENTICAL
Shaft Hardness Rating30.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM LOCATION NOT OTHERWISE SPECIFIED
Screw Thread Series DesignatorUNF SECOND END EIGHTH PORTION
Surface TreatmentPASSIVATE
Worm Thread Section Length1.313 INCHES NOMINAL IN
Shaft Thread DirectionRIGHT-HAND SECOND END EIGHTH PORTION
Worm Helix Angle5 DEG 17 MIN
MaterialSTEEL
Worm Thread Quantity1
Worm Thread DirectionRIGHT-HAND
Unthreaded Section Keyway Width0.1245 INCHES NOMINAL SECOND END SIXTH PORTION IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
6139096 PRIMARY Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate (USA)

Frequently Asked Questions

What is NSN 3040-00-613-9096?

NSN 3040-00-613-9096 is a Worm Shaft, manufactured by Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate, classified under FSC 3040, Miscellaneous Power Transmission Equipment. Status: active.

What part numbers are listed for NSN 3040-00-613-9096?

NSN 3040-00-613-9096 has 1 manufacturer part number on file: 6139096 (Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate).

What are the specifications of 6139096?

Key specifications for 6139096: Shaft Location: BOTH ENDS OF WORM; FSC Application Data: MOUNT,TELESCOPE,ANTIAIRCRAFT FIRE CONTROL EQUIPMENT; Teeth Hardness Rating: 30.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM; Worm Body Length: 1.375 INCHES NOMINAL IN. 29 specifications are documented in the U.S. Government catalog.

Is NSN 3040-00-613-9096 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com