PartsTable TECHNICAL DATA SHEET
NSN 3040-00-460-1410Government record, cited

Shaft, Shouldered3040-00-460-1410

NSN 3040-00-460-1410 · NIIN 004601410
FSC 3040 — Miscellaneous Power Transmission Equipment · FSG 30 — Mechanical Power Transmission Equipment
Government record, cited
Also searched as  3040-00-460-1410 · 3040004601410 · NIIN 004601410 · 00-460-1410 · FSC 3040 Miscellaneous Power Transmission Equipment · 569A954 · 569A954P1
Nearby stock numbers  ·
Features
  • Shaft,shouldered — FSC 3040
  • Surface Finish: 125.0 MICROINCHES
  • Second End Hole Diameter: 0.0950 INCHES MINIMUM AND 0.1000 INCHES MAXIMUM IN
  • Step Quantity: 2
  • First End Diameter: 0.1740 INCHES MINIMUM AND 0.1780 INCHES MAXIMUM IN
  • Second End Diameter: 0.2370 INCHES MINIMUM AND 0.2470 INCHES MAXIMUM IN
  • Second End Step Length: 0.420 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN
  • Largest Step Diameter: 0.237 INCHES MINIMUM AND 0.247 INCHES MAXIMUM IN
Identification
  • NSN: 3040-00-460-1410
  • NIIN: 004601410
  • FSC: 3040 — Miscellaneous Power Transmission Equipment
  • FSG: 30 — Mechanical Power Transmission Equipment
General Description

The Shaft,shouldered, cataloged under National Stock Number 3040-00-460-1410, is classified within Federal Supply Class 3040 (Miscellaneous Power Transmission Equipment) of the Mechanical Power Transmission Equipment group. Government technical data includes 15 specifications, cited from the U.S. Government catalog. 2 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN3040-00-460-1410
Item NameShaft,shouldered
FSC / FSG3040 / 30 — Miscellaneous Power Transmission Equipment
StatusACTIVE
Surface Finish125.0 MICROINCHES
Second End Hole Diameter0.0950 INCHES MINIMUM AND 0.1000 INCHES MAXIMUM IN
Step Quantity2
First End Diameter0.1740 INCHES MINIMUM AND 0.1780 INCHES MAXIMUM IN
Second End Diameter0.2370 INCHES MINIMUM AND 0.2470 INCHES MAXIMUM IN
Second End Step Length0.420 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN
Largest Step Diameter0.237 INCHES MINIMUM AND 0.247 INCHES MAXIMUM IN
First End StyleUNTHREADED CROSS DRILLED
Material Document and ClassificationQQ-S-633,C1018CD FED SPEC SINGLE MATERIAL RESPONSE
Second End Distance From Hole Center to End0.177 INCHES MINIMUM AND 0.197 INCHES MAXIMUM IN
End SimilarityNOT IDENTICAL
First End Hole Diameter0.09375 INCHES NOMINAL IN
Second End StyleSQUARE AND CROSS DRILLED HOLE
MaterialSTEEL
Second End Width Across Flats0.180 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL B — Remove Demilitarization Key Points
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
No manufacturer part numbers on file in the U.S. Government catalog.
Reference documents
ReferenceMeaning
569A954 D/9 Drawing number reference only
U.S. Government activity
569A954P1 3/2 Design control — primary reference
U.S. Government activity
No interchangeability data on file.
Other items in FSC 3040 — Miscellaneous Power Transmission Equipment
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3040-00-001-0046
3040-00-001-0046 · Item name not on file
3040-00-001-0047
3040-00-001-0047 · Item name not on file
3040-00-001-0048
3040-00-001-0048 · Item name not on file
3040-00-001-0068
3040-00-001-0068 · Item name not on file
3040-00-001-0077
3040-00-001-0077 · Item name not on file
3040-00-001-0078
3040-00-001-0078 · Item name not on file
3040-00-001-0089
3040-00-001-0089 · Item name not on file
3040-00-001-1224
3040-00-001-1224 · Item name not on file

Frequently Asked Questions

What is NSN 3040-00-460-1410?

NSN 3040-00-460-1410 is a Shaft,shouldered, classified under FSC 3040, Miscellaneous Power Transmission Equipment. Status: active.

What are the specifications of 3040-00-460-1410?

Key specifications for 3040-00-460-1410: Surface Finish: 125.0 MICROINCHES; Second End Hole Diameter: 0.0950 INCHES MINIMUM AND 0.1000 INCHES MAXIMUM IN; Step Quantity: 2; First End Diameter: 0.1740 INCHES MINIMUM AND 0.1780 INCHES MAXIMUM IN. 15 specifications are documented in the U.S. Government catalog.

Is NSN 3040-00-460-1410 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

What is the DEMIL code for NSN 3040-00-460-1410?

NSN 3040-00-460-1410 has DEMIL Code B. Demilitarization may be required before disposal or transfer to non-military entities.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com