The Lever,remote Control, cataloged under National Stock Number 3040-00-333-6761, is classified within Federal Supply Class 3040 (Miscellaneous Power Transmission Equipment) of the Mechanical Power Transmission Equipment group. Government technical data includes 11 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 3040-00-333-6761 |
| Item Name | Lever,remote Control |
| FSC / FSG | 3040 / 30 — Miscellaneous Power Transmission Equipment |
| Status | ACTIVE |
| Link End Thickness | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN |
| Link End Hole Diameter | 0.188 INCHES MINIMUM AND 0.192 INCHES MAXIMUM IN |
| Bore Length | 0.450 INCHES MINIMUM AND 0.550 INCHES MAXIMUM IN |
| Shaft End Thickness | 0.450 INCHES MINIMUM AND 0.550 INCHES MAXIMUM IN |
| Style Designator | CLEVIS LINK END, SECURING HOLE(S) SHAFT END |
| Material Document and Classification | QQ-A-601, COMP 356, T6 FED SPEC SINGLE MATERIAL RESPONSE |
| Bore Type | PLAIN STRAIGHT |
| Distance Between Fork Inside Spread | 0.260 INCHES NOMINAL IN |
| Center to Center Distance Between Link and Shaft Holes | 1.890 INCHES MINIMUM AND 1.910 INCHES MAXIMUM IN |
| Bore Diameter | 0.490 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN |
| Material | ALUMINUM ALLOY |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 6-83693 | 3/2 Design control — primary reference U.S. Government activity |
NSN 3040-00-333-6761 is a Lever,remote Control, classified under FSC 3040, Miscellaneous Power Transmission Equipment. Status: active.
Key specifications for 3040-00-333-6761: Link End Thickness: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN; Link End Hole Diameter: 0.188 INCHES MINIMUM AND 0.192 INCHES MAXIMUM IN; Bore Length: 0.450 INCHES MINIMUM AND 0.550 INCHES MAXIMUM IN; Shaft End Thickness: 0.450 INCHES MINIMUM AND 0.550 INCHES MAXIMUM IN. 11 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.