The Worm Shaft, cataloged under National Stock Number 3040-00-328-8862, is classified within Federal Supply Class 3040 (Miscellaneous Power Transmission Equipment) of the Mechanical Power Transmission Equipment group. The manufacturer of record is Garwood/feller Inc Garwood Winch Div. Government technical data includes 27 specifications, cited from the U.S. Government catalog. The record lists 3 manufacturer part numbers for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 3040-00-328-8862 |
| Primary Part Number | 12Y4509 |
| Item Name | Worm Shaft |
| FSC / FSG | 3040 / 30 — Miscellaneous Power Transmission Equipment |
| Manufacturer | Garwood/feller Inc Garwood Winch Div |
| Status | ACTIVE |
| Shaft Location | BOTH ENDS OF WORM |
| FSC Application Data | WINCH,DRUM |
| Teeth Hardness Rating | 30.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM |
| Worm Body Length | 11.962 INCHES MINIMUM AND 11.977 INCHES MAXIMUM IN |
| Worm Thread Lead | 1.200 INCHES NOMINAL IN |
| Worm Pitch Diameter | 3.850 INCHES NOMINAL IN |
| Worm Outside Diameter | 4.616 INCHES MINIMUM AND 4.618 INCHES MAXIMUM IN |
| Straight Unthreaded Section Diameter | 1.748 INCHES MINIMUM AND 1.750 INCHES MAXIMUM BOTH ENDS THIRD PORTION IN |
| Straight Unthreaded Section Diameter | 2.124 INCHES MINIMUM AND 2.126 INCHES MAXIMUM BOTH ENDS SECOND PORTION IN |
| Straight Unthreaded Section Diameter | 2.3615 INCHES MINIMUM AND 2.3625 INCHES MAXIMUM BOTH ENDS FIRST PORTION IN |
| Unthreaded Section Keyway Depth | 0.249 INCHES NOMINAL FIRST END IN |
| Unthreaded Section Pin Hole Diameter | 0.6240 INCHES NOMINAL FIRST END IN |
| End Similarity | IDENTICAL |
| Shaft Hardness Rating | 30.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM LOCATION NOT OTHERWISE SPECIFIED |
| Concave Worm Throat Curvature Radius | 1.541 INCHES NOMINAL IN |
| Worm Thread Section Length | 3.750 INCHES NOMINAL IN |
| Worm Helix Angle | 5 DEG 40 MIN |
| Material | STEEL |
| Worm Thread Quantity | 1 |
| Worm Thread Direction | RIGHT-HAND |
| Concave Worm Throat Diameter | 12.227 INCHES NOMINAL IN |
| Unthreaded Section Keyway Width | 0.4360 INCHES NOMINAL FIRST END IN |
| Worm Pressure Angle in Deg | 27.500 |
| Worm Body Tapered Bearing Surface End | NOT PROVIDED |
| Straight Unthreaded Length | 1.375 INCHES NOMINAL BOTH ENDS FIRST PORTION IN |
| Straight Unthreaded Length | 1.8906 INCHES NOMINAL BOTH ENDS SECOND PORTION IN |
| Straight Unthreaded Length | 2.250 INCHES NOMINAL BOTH ENDS THIRD PORTION IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
NSN 3040-00-328-8862 is a Worm Shaft, manufactured by Garwood/feller Inc Garwood Winch Div, classified under FSC 3040, Miscellaneous Power Transmission Equipment. Status: active.
NSN 3040-00-328-8862 has 3 manufacturer part numbers on file: 7954562 (U S Army Tank Automotive Command Amsta-Im-Mm), M305791 (Garwood/feller Inc Garwood Winch Div), 12Y4509 (Garwood/feller Inc Garwood Winch Div).
Key specifications for 12Y4509: Shaft Location: BOTH ENDS OF WORM; FSC Application Data: WINCH,DRUM; Teeth Hardness Rating: 30.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM; Worm Body Length: 11.962 INCHES MINIMUM AND 11.977 INCHES MAXIMUM IN. 27 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.