The Shaft,shouldered, cataloged under National Stock Number 3040-00-225-1443, is classified within Federal Supply Class 3040 (Miscellaneous Power Transmission Equipment) of the Mechanical Power Transmission Equipment group. Government technical data includes 24 specifications, cited from the U.S. Government catalog. 1 additional reference document (drawings, advisory and superseded references) is recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 3040-00-225-1443 |
| Item Name | Shaft,shouldered |
| FSC / FSG | 3040 / 30 — Miscellaneous Power Transmission Equipment |
| Status | ACTIVE |
| Surface Finish | 125.0 MICROINCHES |
| Step Quantity | 15 |
| First End Diameter | 1.1100 INCHES MINIMUM AND 1.1200 INCHES MAXIMUM IN |
| Second End Diameter | 1.2495 INCHES MINIMUM AND 1.2500 INCHES MAXIMUM IN |
| Largest Step Diameter | 1.400 INCHES NOMINAL IN |
| Second End Spline Minor Diameter | 0.9630 INCHES MINIMUM AND 0.9730 INCHES MAXIMUM IN |
| First End Distance Between First and Second Groove Centers | 0.247 INCHES NOMINAL IN |
| First End Style | THREE CIRCULAR GROOVES |
| Second End Spline Major Diameter | 1.1230 INCHES MINIMUM AND 1.1240 INCHES MAXIMUM IN |
| Material Document and Classification | ASTM A108 ASSN STD 1ST MATERIAL RESPONSE OR QQ-S-637 FED SPEC 2ND MATERIAL RESPONSE |
| Second End Groove Diameter | 0.9062 INCHES NOMINAL IN |
| End Similarity | NOT IDENTICAL |
| First End Distance From End to Groove | 0.085 INCHES NOMINAL IN |
| Second End Spline Quantity | 10 |
| Second End Groove Width | 0.1750 INCHES NOMINAL IN |
| Second End Distance From End to Groove | 0.5938 INCHES NOMINAL IN |
| First End Groove Diameter | 0.9740 INCHES MINIMUM AND 0.9940 INCHES MAXIMUM IN |
| Second End Style | TWO CIRCULAR GROOVES, SPLINED AND INTERNALLY THREADED |
| Material | STEEL COMP 1018 OR STEEL COMP 1117 |
| First End Groove Width | 0.0950 INCHES MINIMUM AND 0.0970 INCHES MAXIMUM IN |
| Second End Internal Thread Length | 1.000 INCHES NOMINAL IN |
| First End Distance Between Second and Third Groove Centers | 0.257 INCHES NOMINAL IN |
| Second End Spline Length | 0.594 INCHES NOMINAL IN |
| Second End Distance Between First and Second Groove Centers | 0.762 INCHES NOMINAL IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL Q — CCL Item — Commerce Control List |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| 2584502 | 3/2 Design control — primary reference U.S. Government activity |
NSN 3040-00-225-1443 is a Shaft,shouldered, classified under FSC 3040, Miscellaneous Power Transmission Equipment. Status: active.
Key specifications for 3040-00-225-1443: Surface Finish: 125.0 MICROINCHES; Step Quantity: 15; First End Diameter: 1.1100 INCHES MINIMUM AND 1.1200 INCHES MAXIMUM IN; Second End Diameter: 1.2495 INCHES MINIMUM AND 1.2500 INCHES MAXIMUM IN. 24 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
NSN 3040-00-225-1443 has DEMIL Code Q. Demilitarization may be required before disposal or transfer to non-military entities.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.