PartsTable TECHNICAL DATA SHEET
NSN 3040-00-223-7169Government record, cited

Worm Shaft3040-00-223-7169

NSN 3040-00-223-7169 · NIIN 002237169 · Part number 8579548
Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate · FSC 3040 — Miscellaneous Power Transmission Equipment · FSG 30 — Mechanical Power Transmission Equipment · CAGE 19200
Government record, cited
NSN 3040-00-223-7169 — this item is cataloged by the U.S. Government under National Stock Number 3040-00-223-7169. Manufacturer of record part number: 8579548.
Also searched as  3040-00-223-7169 · 3040002237169 · NIIN 002237169 · 00-223-7169 · FSC 3040 Miscellaneous Power Transmission Equipment · CAGE 19200 · 8579548
Nearby stock numbers  ·
Features
  • Worm Shaft — FSC 3040
  • Shaft Location: BOTH ENDS OF WORM
  • FSC Application Data: MOUNT,TELESCOPE
  • Teeth Hardness Rating: 26.0 ROCKWELL C MINIMUM AND 31.0 ROCKWELL C MAXIMUM
  • Worm Body Length: 0.490 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
  • Worm Thread Lead: 0.083 INCHES NOMINAL IN
  • Thread Length: 0.250 INCHES NOMINAL SECOND END FOURTH PORTION IN
  • Worm Pitch Diameter: 0.083 INCHES NOMINAL IN
Identification
  • NSN: 3040-00-223-7169
  • NIIN: 002237169
  • FSC: 3040 — Miscellaneous Power Transmission Equipment
  • FSG: 30 — Mechanical Power Transmission Equipment
  • Primary part number: 8579548
  • Manufacturer: Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate
General Description

The Worm Shaft, cataloged under National Stock Number 3040-00-223-7169, is classified within Federal Supply Class 3040 (Miscellaneous Power Transmission Equipment) of the Mechanical Power Transmission Equipment group. The manufacturer of record is Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate. Government technical data includes 29 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN3040-00-223-7169
Primary Part Number8579548
Item NameWorm Shaft
FSC / FSG3040 / 30 — Miscellaneous Power Transmission Equipment
ManufacturerCombat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate
StatusACTIVE
Shaft LocationBOTH ENDS OF WORM
FSC Application DataMOUNT,TELESCOPE
Teeth Hardness Rating26.0 ROCKWELL C MINIMUM AND 31.0 ROCKWELL C MAXIMUM
Worm Body Length0.490 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
Worm Thread Lead0.083 INCHES NOMINAL IN
Thread Length0.250 INCHES NOMINAL SECOND END FOURTH PORTION IN
Worm Pitch Diameter0.083 INCHES NOMINAL IN
Worm Outside Diameter0.365 INCHES MINIMUM AND 0.370 INCHES MAXIMUM IN
Straight Unthreaded Section Diameter0.149 INCHES NOMINAL SECOND END FIFTH PORTION IN
Straight Unthreaded Section Diameter0.180 INCHES MINIMUM AND 0.190 INCHES MAXIMUM FIRST END FIRST PORTION IN
Straight Unthreaded Section Diameter0.180 INCHES MINIMUM AND 0.190 INCHES MAXIMUM SECOND END FIRST PORTION IN
Straight Unthreaded Section Diameter0.236 INCHES NOMINAL SECOND END THIRD PORTION IN
Straight Unthreaded Section Diameter0.310 INCHES MINIMUM AND 0.320 INCHES MAXIMUM SECOND END SECOND PORTION IN
Unthreaded Section Pin Hole Diameter0.0625 INCHES NOMINAL SECOND END FIFTH PORTION IN
End SimilarityNOT IDENTICAL
Shaft Hardness Rating26.0 ROCKWELL C MINIMUM AND 31.0 ROCKWELL C MAXIMUM LOCATION NOT OTHERWISE SPECIFIED
Screw Thread Series DesignatorUNF BOTH ENDS
Worm Thread Section Length0.490 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
Shaft Thread DirectionRIGHT-HAND SECOND END FOURTH PORTION
Worm Helix Angle4 DEG 47 MIN
MaterialSTEEL
Worm Thread Quantity1
Worm Thread DirectionLEFT-HAND
Worm Pressure Angle in Deg14.500
Worm Body Tapered Bearing Surface EndNOT PROVIDED
Straight Unthreaded Length0.120 INCHES MINIMUM AND 0.125 INCHES MAXIMUM SECOND END SECOND PORTION IN
Straight Unthreaded Length0.223 INCHES NOMINAL SECOND END THIRD PORTION IN
Straight Unthreaded Length0.372 INCHES NOMINAL SECOND END FIRST PORTION IN
Straight Unthreaded Length0.472 INCHES NOMINAL FIRST END FIRST PORTION IN
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
8579548 PRIMARY Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate (USA)
No interchangeability data on file.
Other items in FSC 3040 — Miscellaneous Power Transmission Equipment
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3040-00-001-0046
3040-00-001-0046 · Item name not on file
3040-00-001-0047
3040-00-001-0047 · Item name not on file
3040-00-001-0048
3040-00-001-0048 · Item name not on file
3040-00-001-0068
3040-00-001-0068 · Item name not on file
3040-00-001-0077
3040-00-001-0077 · Item name not on file
3040-00-001-0078
3040-00-001-0078 · Item name not on file
3040-00-001-0089
3040-00-001-0089 · Item name not on file
3040-00-001-1224
3040-00-001-1224 · Item name not on file

Frequently Asked Questions

What is NSN 3040-00-223-7169?

NSN 3040-00-223-7169 is a Worm Shaft, manufactured by Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate, classified under FSC 3040, Miscellaneous Power Transmission Equipment. Status: active.

What part numbers are listed for NSN 3040-00-223-7169?

NSN 3040-00-223-7169 has 1 manufacturer part number on file: 8579548 (Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate).

What are the specifications of 8579548?

Key specifications for 8579548: Shaft Location: BOTH ENDS OF WORM; FSC Application Data: MOUNT,TELESCOPE; Teeth Hardness Rating: 26.0 ROCKWELL C MINIMUM AND 31.0 ROCKWELL C MAXIMUM; Worm Body Length: 0.490 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN. 29 specifications are documented in the U.S. Government catalog.

Is NSN 3040-00-223-7169 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com