PartsTable TECHNICAL DATA SHEET
NSN 3040-00-125-8783Government record, cited

Worm Shaft3040-00-125-8783

NSN 3040-00-125-8783 · NIIN 001258783 · Part number 8587564
Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate · FSC 3040 — Miscellaneous Power Transmission Equipment · FSG 30 — Mechanical Power Transmission Equipment · CAGE 19200
Government record, cited
NSN 3040-00-125-8783 — this item is cataloged by the U.S. Government under National Stock Number 3040-00-125-8783. Manufacturer of record part number: 8587564.
Also searched as  3040-00-125-8783 · 3040001258783 · NIIN 001258783 · 00-125-8783 · FSC 3040 Miscellaneous Power Transmission Equipment · CAGE 19200 · 8587564
Nearby stock numbers  ·
Features
  • Worm Shaft — FSC 3040
  • Shaft Location: BOTH ENDS OF WORM
  • FSC Application Data: MOUNT,TELESCOPE
  • Teeth Hardness Rating: 33.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM
  • Worm Body Length: 3.173 INCHES NOMINAL IN
  • Worm Thread Lead: 0.245 INCHES NOMINAL IN
  • Thread Length: 0.323 INCHES NOMINAL SECOND END FIFTH PORTION IN
  • Material Document and Classification: QQ-S-763, CLASS 303, 303SE OR 304 CONDITION A FED SPEC ALL MATERIAL RESPONSES
Identification
  • NSN: 3040-00-125-8783
  • NIIN: 001258783
  • FSC: 3040 — Miscellaneous Power Transmission Equipment
  • FSG: 30 — Mechanical Power Transmission Equipment
  • Primary part number: 8587564
  • Manufacturer: Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate
General Description

The Worm Shaft, cataloged under National Stock Number 3040-00-125-8783, is classified within Federal Supply Class 3040 (Miscellaneous Power Transmission Equipment) of the Mechanical Power Transmission Equipment group. The manufacturer of record is Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate. Government technical data includes 29 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.

Technical Specifications
ParameterValue
NSN3040-00-125-8783
Primary Part Number8587564
Item NameWorm Shaft
FSC / FSG3040 / 30 — Miscellaneous Power Transmission Equipment
ManufacturerCombat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate
StatusACTIVE
Shaft LocationBOTH ENDS OF WORM
FSC Application DataMOUNT,TELESCOPE
Teeth Hardness Rating33.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM
Worm Body Length3.173 INCHES NOMINAL IN
Worm Thread Lead0.245 INCHES NOMINAL IN
Thread Length0.323 INCHES NOMINAL SECOND END FIFTH PORTION IN
Material Document and ClassificationQQ-S-763, CLASS 303, 303SE OR 304 CONDITION A FED SPEC ALL MATERIAL RESPONSES
Worm Pitch Diameter0.776 INCHES MINIMUM AND 0.778 INCHES MAXIMUM IN
Worm Outside Diameter0.932 INCHES MINIMUM AND 0.937 INCHES MAXIMUM IN
Straight Unthreaded Section Diameter0.339 INCHES MINIMUM AND 0.354 INCHES MAXIMUM SECOND END SIXTH PORTION IN
Straight Unthreaded Section Diameter0.357 INCHES MINIMUM AND 0.367 INCHES MAXIMUM SECOND END FOURTH PORTION IN
Straight Unthreaded Section Diameter0.374 INCHES NOMINAL SECOND END SEVENTH PORTION IN
Straight Unthreaded Section Diameter0.401 INCHES MINIMUM AND 0.416 INCHES MAXIMUM FIRST END SECOND PORTION IN
Straight Unthreaded Section Diameter0.402 INCHES MINIMUM AND 0.417 INCHES MAXIMUM SECOND END SECOND PORTION IN
Straight Unthreaded Section Diameter0.436 INCHES MINIMUM AND 0.437 INCHES MAXIMUM FIRST END THIRD PORTION IN
Straight Unthreaded Section Diameter0.437 INCHES NOMINAL SECOND END THIRD PORTION IN
Straight Unthreaded Section Diameter0.440 INCHES MINIMUM AND 0.450 INCHES MAXIMUM FIRST END FIRST PORTION IN
Straight Unthreaded Section Diameter0.530 INCHES MINIMUM AND 0.540 INCHES MAXIMUM SECOND END FIRST PORTION IN
End SimilarityNOT IDENTICAL
Shaft Hardness Rating33.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM LOCATION NOT OTHERWISE SPECIFIED
Screw Thread Series DesignatorUNF BOTH ENDS
Surface TreatmentPASSIVATE
Worm Thread Section Length1.490 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
Shaft Thread DirectionRIGHT-HAND SECOND END FIFTH PORTION
Worm Helix Angle5DEG44MIN
MaterialSTEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304
Worm Thread Quantity1
Worm Thread DirectionLEFT-HAND
Worm Pressure Angle in Deg14.500
Lifecycle & Compliance
Acquisition StatusACTIVE
DEMIL CodeDEMIL A — No Demilitarization Required
HazardNo hazard code in the DLA record (HMIC N)
Criticality CodeX
Cross-Reference Index
Part NumberManufacturer
8587564 PRIMARY Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate (USA)
No interchangeability data on file.
Other items in FSC 3040 — Miscellaneous Power Transmission Equipment
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3040-00-001-0046
3040-00-001-0046 · Item name not on file
3040-00-001-0047
3040-00-001-0047 · Item name not on file
3040-00-001-0048
3040-00-001-0048 · Item name not on file
3040-00-001-0068
3040-00-001-0068 · Item name not on file
3040-00-001-0077
3040-00-001-0077 · Item name not on file
3040-00-001-0078
3040-00-001-0078 · Item name not on file
3040-00-001-0089
3040-00-001-0089 · Item name not on file
3040-00-001-1224
3040-00-001-1224 · Item name not on file

Frequently Asked Questions

What is NSN 3040-00-125-8783?

NSN 3040-00-125-8783 is a Worm Shaft, manufactured by Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate, classified under FSC 3040, Miscellaneous Power Transmission Equipment. Status: active.

What part numbers are listed for NSN 3040-00-125-8783?

NSN 3040-00-125-8783 has 1 manufacturer part number on file: 8587564 (Combat Capabilities Development Command (ccdc) Armaments Center Dba Ccdc Div Logistics Research and Engineering Directorate).

What are the specifications of 8587564?

Key specifications for 8587564: Shaft Location: BOTH ENDS OF WORM; FSC Application Data: MOUNT,TELESCOPE; Teeth Hardness Rating: 33.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM; Worm Body Length: 3.173 INCHES NOMINAL IN. 29 specifications are documented in the U.S. Government catalog.

Is NSN 3040-00-125-8783 hazardous material?

No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.

Sources

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.

U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.

✓ Data cited from the U.S. Government catalog; commercial cross-references from OEM and certified industry sources.
PartsTable Design LLC · partstable.com