The Lever,remote Control, cataloged under National Stock Number 3040-00-106-4547, is classified within Federal Supply Class 3040 (Miscellaneous Power Transmission Equipment) of the Mechanical Power Transmission Equipment group. The manufacturer of record is The Boeing Company. Government technical data includes 11 specifications, cited from the U.S. Government catalog. The record lists 1 manufacturer part number for this item, enabling identification through both NSN and commercial part number lookups. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 3040-00-106-4547 |
| Primary Part Number | 114P2041-2 |
| Item Name | Lever,remote Control |
| FSC / FSG | 3040 / 30 — Miscellaneous Power Transmission Equipment |
| Manufacturer | The Boeing Company |
| Status | ACTIVE |
| Link End Thickness | 0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN |
| Link End Hole Diameter | 0.2486 INCHES MINIMUM AND 0.2497 INCHES MAXIMUM IN |
| Shaft End Thickness | 0.395 INCHES MINIMUM AND 0.405 INCHES MAXIMUM IN |
| Material Document and Classification | QQ-S-764, TYPE 303, COND A FED SPEC SINGLE MATERIAL RESPONSE |
| Bore Type | SPLINED |
| Shaft Securing Method | SPLINE |
| Spline Quantity | 24 |
| Center to Center Distance Between Link and Shaft Holes | 1.990 INCHES MINIMUM AND 2.010 INCHES MAXIMUM IN |
| Minor Diameter | 0.366 INCHES MINIMUM AND 0.368 INCHES MAXIMUM IN |
| Material | STEEL |
| Major Diameter | 0.397 INCHES MINIMUM AND 0.403 INCHES MAXIMUM IN |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Part Number | Manufacturer |
|---|---|
| 114P2041-2 PRIMARY | The Boeing Company (USA) |
NSN 3040-00-106-4547 is a Lever,remote Control, manufactured by The Boeing Company, classified under FSC 3040, Miscellaneous Power Transmission Equipment. Status: active.
NSN 3040-00-106-4547 has 1 manufacturer part number on file: 114P2041-2 (The Boeing Company).
Key specifications for 114P2041-2: Link End Thickness: 0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN; Link End Hole Diameter: 0.2486 INCHES MINIMUM AND 0.2497 INCHES MAXIMUM IN; Shaft End Thickness: 0.395 INCHES MINIMUM AND 0.405 INCHES MAXIMUM IN; Material Document and Classification: QQ-S-764, TYPE 303, COND A FED SPEC SINGLE MATERIAL RESPONSE. 11 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.