The Gearshaft,spur, cataloged under National Stock Number 3040-00-053-3888, is classified within Federal Supply Class 3040 (No Item Name Available) of the Mechanical Power Transmission Equipment group. The primary manufacturer of record is Simmonds Precision Products Inc. Government technical data includes 14 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 1 commercial cross-reference from 1 manufacturer, enabling identification through both NSN and commercial part number lookups. 1 verified substitute exists in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 3040-00-053-3888 |
| Primary Part Number | A31106 |
| Item Name | Gearshaft,spur |
| FSC / FSG | 3040 / 30 — No Item Name Available |
| Manufacturer | Simmonds Precision Products Inc |
| Status | ACTIVE |
| Teeth Quantity | 58 |
| Shaft End Type | PLAIN |
| Hardness Rating | 32.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM OVERALL |
| Shaft Largest Diameter | 0.160 INCHES NOMINAL IN |
| Longer Shaft Segment Length | 0.195 INCHES NOMINAL IN |
| Gear Location on Shaft | OFF CENTER BETWEEN ENDS OF SHAFT |
| Gear Material | STEEL CORROSION RESISTING |
| Shaft Material | STEEL CORROSION RESISTING |
| Pressure Angle | 20.0000 DEGREES |
| Shaft Type | SHOULDERED |
| Shaft End Size | 0.125 INCHES IN |
| Face Width | 0.085 INCHES NOMINAL IN |
| Gear Outside Diameter | 0.625 INCHES NOMINAL IN |
| Diametral Pitch | 96 |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| A31106 PRIMARY | Simmonds Precision Products Inc (USA) |
NSN 3040-00-053-3888 is a Gearshaft,spur, manufactured by Simmonds Precision Products Inc, classified under FSC 3040 (No Item Name Available). Status: active.
NSN 3040-00-053-3888 has 1 cross-referenced part number: A31106 (Simmonds Precision Products Inc).
There is 1 known substitute for 3040-00-053-3888: 5330-00-383-3549. Verify interchangeability with system specifications before substitution.
Key specifications for A31106: Teeth Quantity: 58; Shaft End Type: PLAIN; Hardness Rating: 32.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM OVERALL; Shaft Largest Diameter: 0.160 INCHES NOMINAL IN. 15 total characteristics are documented in the Federal Logistics Information System.