PartsTable
Technical Data Sheet
Download PDF

303M — CAPACITOR,VARIABLE,MICA DIELECTR

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

303M: CAPACITOR,VARIABLE,MICA DIELECTR.

CAPACITOR,VARIABLE,MICA DIELECTR. Key specifications include material: PLASTIC POLYCARBONATE LENS, body_style: COMPRESSION, body_width: 0.875 INCHES NOMINAL IN, bore_shape: STRAIGHT, body_height: 0.344 INCHES NOMINAL IN, body_length: 0.938 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-155-6384, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 303M
NSN: 3110-00-155-6384
NIINs: 001556384, 002649496, 003035252, 010635996
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 38443 — SKF USA INC. (USA)
SPECIFICATIONS
materialPLASTIC POLYCARBONATE LENS
body_styleCOMPRESSION
body_width0.875 INCHES NOMINAL IN
bore_shapeSTRAIGHT
body_height0.344 INCHES NOMINAL IN
body_length0.938 INCHES NOMINAL IN
bore_diameter17.00 MILLIMETERS NOMINAL MM
bushing_shapeROUND
carrying_caseNOT PROVIDED
overall_width14.0 MILLIMETERS NOMINAL MM
inclosure_typeENCASED
load_directionRADIAL
NSN3110-00-155-6384
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 303M · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION MATERIAL: LUBRICANT
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
OVERALL OUTSIDE DIAMETER: 47.00 MILLIMETERS NOMINAL MM
•
BORE SHAPE: STRAIGHT
•
LOAD DIRECTION: RADIAL
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS
LUBRICATION MATERIALLUBRICANT
INTERNAL FIT-UP DESIGNATIONSTANDARD
SURFACE FINISHGROUND
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
OVERALL WIDTH14.0 MILLIMETERS NOMINAL MM
OVERALL OUTSIDE DIAMETER47.00 MILLIMETERS NOMINAL MM
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
STANDARD TOLERANCE DESIGNATIONABEC NO.1
BORE DIAMETER17.00 MILLIMETERS NOMINAL MM
SUBSTITUTES & CROSS-REFERENCES 4
1303Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
517Reference document
Same NSN cross-reference
Reference document — Secondary reference
526Reference document
Same NSN cross-reference
Reference document — Secondary reference
631Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 303M?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 303M?
303M is a CAPACITOR,VARIABLE,MICA DIELECTR. It is classified as a MRO (MRO_GENERAL).
What parts can replace 303M?
There are 4 known substitutes for 303M: 1303, 517, 526 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 303M?
303M is cataloged in the U.S. Government catalog under NSN 3110-00-155-6384. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 303M