PartsTable
Technical Data Sheet
Download PDF

3039937 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

3039937: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include end_item_identification: 320D & 320L EXCAVATOR W/C6.4 ENGINE, part_name_assigned_by_controlling_agency: KIT, GAUGE. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-841-0755, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3039937
NSN: 5330-00-841-0755
NIINs: 008410755, 015423088, 016122527
FSC: 5330 — Packing and Gasket Materials
CAGE: 00198 — PRATT & WHITNEY CANADA CORP DIV PRATT & WHITNEY CANADA CORP. (CAN)
SPECIFICATIONS
end_item_identification320D & 320L EXCAVATOR W/C6.4 ENGINE
part_name_assigned_by_controlling_agencyKIT, GAUGE
NSN5330-00-841-0755
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 3039937 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.010 INCHES MINIMUM AND 0.022 INCHES MAXIMUM IN
•
SIDE RADIUS FROM GASKET CENTER: 1.545 INCHES MINIMUM AND 1.555 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: NON-CIRCULAR
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
OUTSIDE CORNER INVERTED RADIUS: 0.210 INCHES MINIMUM AND 0.230 INCHES MAXIMUM IN
•
APERTURE DIAMETER: 2.750 INCHES MINIMUM AND 2.770 INCHES MAXIMUM IN
•
BOLT HOLE QUANTITY: 3
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.010 INCHES MINIMUM AND 0.022 INCHES MAXIMUM IN
SIDE RADIUS FROM GASKET CENTER1.545 INCHES MINIMUM AND 1.555 INCHES MAXIMUM IN
STYLE DESIGNATORNON-CIRCULAR
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH3.697 INCHES NOMINAL IN
OUTSIDE CORNER INVERTED RADIUS0.210 INCHES MINIMUM AND 0.230 INCHES MAXIMUM IN
APERTURE DIAMETER2.750 INCHES MINIMUM AND 2.770 INCHES MAXIMUM IN
BOLT HOLE QUANTITY3
BOLT CIRCLE DIAMETER3.090 INCHES MINIMUM AND 3.110 INCHES MAXIMUM IN
OUTSIDE CORNER RADIUS0.260 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 4
3009332Reference document
Same NSN cross-reference
Reference document — Secondary reference
5010858Reference document
Same NSN cross-reference
Reference document — Secondary reference
968.20.11.112Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
968.20.12.497Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy 3039937?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3039937?
3039937 is a GASKET.
What parts can replace 3039937?
There are 4 known substitutes for 3039937: 3009332, 5010858, 968.20.11.112 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 3039937?
3039937 is cataloged in the U.S. Government catalog under NSN 5330-00-841-0755. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3039937