PartsTable
Technical Data Sheet
PartsTable / MRO / 30384-1
30384-1 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

CONNECTOR,RECEPTACLE,ELECTRICAL. Key specifications include material: STEEL OVERALL, head_style: HEXAGON, head_height: 0.150 INCHES MINIMUM AND 0.163 INCHES MAXIMUM IN, thread_class: 2A A, thread_length: 0.750 INCHES MINIMUM AND 0.938 INCHES MAXIMUM IN, surface_finish: 63.0 MICROINCHES THREADS. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-225-3843, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 30384-1
NSN: 5305-00-225-3843
FSC: 5305
CAGE: H0G87 — WIBA ZEVENAAR B.V. (NLD)
SPECIFICATIONS
materialSTEEL OVERALL
head_styleHEXAGON
head_height0.150 INCHES MINIMUM AND 0.163 INCHES MAXIMUM IN
thread_class2A A
thread_length0.750 INCHES MINIMUM AND 0.938 INCHES MAXIMUM IN
surface_finish63.0 MICROINCHES THREADS
fastener_length0.969 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
surface_treatmentZINC AND CHROMATE OVERALL
width_between_flats0.428 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
nominal_thread_diameter0.250 INCHES IN
minimum_tensile_strength150000 POUNDS PER SQUARE INCH LBS
NSN5305-00-225-3843
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 30384-1 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 0.969 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
•
WIDTH BETWEEN FLATS: 0.428 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
•
MINIMUM TENSILE STRENGTH: 150000 POUNDS PER SQUARE INCH LBS
•
NOMINAL THREAD DIAMETER: 0.250 INCHES IN
•
THREAD QUANTITY PER INCH: 20
•
MATERIAL: STEEL OVERALL
•
SURFACE FINISH: 63.0 MICROINCHES THREADS
TECHNICAL CHARACTERISTICS (FLIS)
FASTENER LENGTH0.969 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
WIDTH BETWEEN FLATS0.428 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
END ITEM IDENTIFICATIONMRAP-RG-33 ARMORED UTILITY VEHICLE (AUV); MRAP - M-ATV WITH CS13 POP AND SNE; MEDIUM MINE PROTECTED VEHICLE - AMPV; MULTIPLE LAUNCH ROCKET SYSTEM (MLRS); ARMORED MULTI-PURPOSE VEHICLE (AMPV); A4 BRADLEY FIGHTING VEHICLE; A3 BRADLEY FIGHTING VEHICLE; LOGISTICS SUPPORT VESSEL
MINIMUM TENSILE STRENGTH150000 POUNDS PER SQUARE INCH LBS
NOMINAL THREAD DIAMETER0.250 INCHES IN
THREAD QUANTITY PER INCH20
MATERIALSTEEL OVERALL
SURFACE FINISH63.0 MICROINCHES THREADS
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
MATERIAL DOCUMENT AND CLASSIFICATIONSAE J429 GRADE 8 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A354 GRADE BD ASSN STD SINGLE MATERIAL RESPONSE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 29
121900Interchangeable
interchangeable cross-reference
interchangeable
FFS85TYPE2STYLE10PGRADE2Interchangeable
interchangeable cross-reference
interchangeable
S1616Interchangeable
interchangeable cross-reference
interchangeable
0S1616Interchangeable
interchangeable cross-reference
interchangeable
N0304 2-269Interchangeable
interchangeable cross-reference
interchangeable
N304-7-47Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 30384-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 30384-1?
30384-1 is a CONNECTOR,RECEPTACLE,ELECTRICAL. It is classified as a MRO (MRO_GENERAL).
What parts can replace 30384-1?
There are 29 known substitutes for 30384-1: 121900, FFS85TYPE2STYLE10PGRADE2, S1616 and 26 more. Substitute compatibility should be verified for your specific system.
Is 30384-1 still available?
30384-1 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 30384-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026