PartsTable
Technical Data Sheet
Download PDF

303466 — PLATE,RETAINING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

303466: PLATE,RETAINING.

The PLATE,RETAINING is a the manufacturer industrial component. Key specifications include width: 0.375 INCHES NOMINAL IN, material: STEEL COMP 1075 OVERALL, hole_diameter: 0.203 INCHES NOMINAL IN, overall_height: 0.922 INCHES MINIMUM AND 0.953 INCHES MAXIMUM IN, material_thickness: 0.040 INCHES MINIMUM AND 0.044 INCHES MAXIMUM IN, material_document_and_classification: SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-758-9835, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
303466
NSN: 5340-00-758-9835
NIINs: 007589835, 012522547
FSC: 5340 — Hardware, Commercial
CAGE: 1UVT5 — BRP US INC (USA)
SPECIFICATIONS
width0.375 INCHES NOMINAL IN
materialSTEEL COMP 1075 OVERALL
hole_diameter0.203 INCHES NOMINAL IN
overall_height0.922 INCHES MINIMUM AND 0.953 INCHES MAXIMUM IN
material_thickness0.040 INCHES MINIMUM AND 0.044 INCHES MAXIMUM IN
material_document_and_classificationSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
distance_from_end_to_hole_nearest_loop0.234 INCHES NOMINAL IN
NSN5340-00-758-9835
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 303466 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DISTANCE FROM END TO HOLE NEAREST LOOP: 0.234 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL THICKNESS: 0.040 INCHES MINIMUM AND 0.044 INCHES MAXIMUM IN
•
WIDTH: 0.375 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 1075 OVERALL
•
HOLE DIAMETER: 0.203 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.922 INCHES MINIMUM AND 0.953 INCHES MAXIMUM IN
DISTANCE FROM END TO HOLE NEAREST LOOP0.234 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL THICKNESS0.040 INCHES MINIMUM AND 0.044 INCHES MAXIMUM IN
WIDTH0.375 INCHES NOMINAL IN
MATERIALSTEEL COMP 1075 OVERALL
HOLE DIAMETER0.203 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy 303466?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 303466?
303466 is a PLATE,RETAINING.
What is the NSN for 303466?
303466 is cataloged in the U.S. Government catalog under NSN 5340-00-758-9835. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 303466

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.