PartsTable
Technical Data Sheet
PartsTable / MRO / 3034-7
3034-7 ✓ Verified by PartsTable
Lindy · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

Ideal for use in mainland Europe!<br>- Fully moulded<br>- VCE Approved. Key specifications include material: STEEL, shaft_type: ROUND, FLATTED, THREADED HOLE SINGLE ACTUATOR, bonnet_type: OUTSIDE SCREW-YOKE, flat_height: 0.312 INCHES NOMINAL SINGLE ACTUATOR IN, shaft_length: 0.875 INCHES NOMINAL SINGLE ACTUATOR IN, pole_quantity: 1 EACH SECTION FRONT. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-248-2391, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 3034-7
NSN: 5315-00-248-2391
FSC: 5315
CAGE: 61822 — AMCA INTL CORP UNIT CRANE DIV (USA)
SPECIFICATIONS
materialSTEEL
shaft_typeROUND, FLATTED, THREADED HOLE SINGLE ACTUATOR
bonnet_typeOUTSIDE SCREW-YOKE
flat_height0.312 INCHES NOMINAL SINGLE ACTUATOR IN
shaft_length0.875 INCHES NOMINAL SINGLE ACTUATOR IN
pole_quantity1 EACH SECTION FRONT
terminal_typeTAB W/SCREW
shaft_diameter0.375 INCHES NOMINAL SINGLE ACTUATOR IN
throw_quantity2 EACH SECTION FRONT
connection_typeTHREADED INTERNAL PIPE FIRST END
first_end_styleCHAMFERED
mounting_methodBASE SINGLE MOUNTING FACILITY
NSN5315-00-248-2391
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 3034-7 · Lindy ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
PIN OVERALL LENGTH: 6.625 INCHES NOMINAL IN
•
FIRST HOLE DIAMETER: 0.688 INCHES NOMINAL IN
•
PIN OVERALL DIAMETER: 2.4380 INCHES NOMINAL IN
•
FIRST END TAPER LENGTH: 0.062 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN: 1.000 INCHES NOMINAL IN
•
FIRST END STYLE: CHAMFERED
TECHNICAL CHARACTERISTICS (FLIS)
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
PIN OVERALL LENGTH6.625 INCHES NOMINAL IN
FIRST HOLE DIAMETER0.688 INCHES NOMINAL IN
PIN OVERALL DIAMETER2.4380 INCHES NOMINAL IN
FIRST END TAPER LENGTH0.062 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN1.000 INCHES NOMINAL IN
FIRST END STYLECHAMFERED
HOLE ARRANGEMENT STYLEONE END DRILLED
FIRST END TAPER ANGLE30.0 DEGREES NOMINAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
30347Interchangeable
interchangeable cross-reference
interchangeable
3SR2A3A9000S6202-74090Interchangeable
interchangeable cross-reference
interchangeable
80997DInterchangeable
interchangeable cross-reference
interchangeable
02191-1154Interchangeable
interchangeable cross-reference
interchangeable
303470Interchangeable
interchangeable cross-reference
interchangeable
3034Y7Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 3034-7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3034-7?
3034-7 is a FILTER ASSEMBLY,ELECTRICAL manufactured by Lindy. It is classified as a MRO (MRO_GENERAL).
What parts can replace 3034-7?
There are 6 known substitutes for 3034-7: 30347, 3SR2A3A9000S6202-74090, 80997D and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 3034-7?
3034-7 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-248-2391. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3034-7

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026