PartsTable
Technical Data Sheet
Download PDF

3034-01 — RIFLE,7.62 MILLIMETER

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

3034-01: RIFLE,7.62 MILLIMETER.

The RIFLE,7.62 MILLIMETER is a the manufacturer industrial component. Key specifications include feed_method: MAGAZINE, model_number: M110A1, overall_length: 39.5 INCHES MINIMUM AND 43.5 INCHES MAXIMUM IN, operation_method: GAS, size_designation: 7.62 MILLIMETER MM, weapon_model_number: M110A1. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-100-4462, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3034-01
NSN: 3110-00-100-4462
NIINs: 001004462, 006828010, 013882486, 016585678
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 58275 — SASCO INC CANADIAN DIV
SPECIFICATIONS
feed_methodMAGAZINE
model_numberM110A1
overall_length39.5 INCHES MINIMUM AND 43.5 INCHES MAXIMUM IN
operation_methodGAS
size_designation7.62 MILLIMETER MM
weapon_model_numberM110A1
functional_descriptionSNIPER RIFLE
feeding_device_capacity20
weapon_size_designation7.62 MILLIMETER MM
part_name_assigned_by_controlling_agencyM110A1 SNIPER RIFLE
NSN3110-00-100-4462
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 3034-01 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CUP WIDTH: 0.7500 INCHES NOMINAL IN
•
STYLE DESIGNATOR: STRAIGHT BORE, NORMAL ANGLE
•
OVERALL OUTSIDE DIAMETER: 2.7500 INCHES NOMINAL IN
•
BACKFACE CORNER RADIUS: 0.0460 INCHES NOMINAL IN
•
CONE CORNER RADIUS: 0.1400 INCHES NOMINAL IN
•
STANDOUT WIDTH: 0.1875 INCHES NOMINAL IN
•
CONE WIDTH: 0.9983 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
CUP WIDTH0.7500 INCHES NOMINAL IN
STYLE DESIGNATORSTRAIGHT BORE, NORMAL ANGLE
OVERALL WIDTH0.9375 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER2.7500 INCHES NOMINAL IN
BACKFACE CORNER RADIUS0.0460 INCHES NOMINAL IN
CONE CORNER RADIUS0.1400 INCHES NOMINAL IN
STANDOUT WIDTH0.1875 INCHES NOMINAL IN
CONE WIDTH0.9983 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
BORE DIAMETER1.3125 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 3
2585-2523Reference document
Same NSN cross-reference
Reference document — Secondary reference
BM22Reference document
Same NSN cross-reference
Reference document — Secondary reference
100505Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 3034-01?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3034-01?
3034-01 is a RIFLE,7.62 MILLIMETER.
What parts can replace 3034-01?
There are 3 known substitutes for 3034-01: 2585-2523, BM22, 100505. Substitute compatibility should be verified for your specific system.
What is the NSN for 3034-01?
3034-01 is cataloged in the U.S. Government catalog under NSN 3110-00-100-4462. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3034-01

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.