PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 3033T86
3033T86 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.204 INCHES NOMINAL IN, overall_width: 0.360 INCHES MINIMUM AND 0.392 INCHES MAXIMUM IN, special_features: CUSHIONED, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED, material_diameter: 0.025 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-087-4268, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
3033T86
NSN: 5340-01-087-4268
FSC: 5340
CAGE: 99207 — GENERAL ELECTRIC COMPANY DBA GE AEROSPACE (USA)
SPECIFICATIONS
diameter0.204 INCHES NOMINAL IN
overall_width0.360 INCHES MINIMUM AND 0.392 INCHES MAXIMUM IN
special_featuresCUSHIONED
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_diameter0.025 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN
loop_inside_diameter0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
distance_from_loop_center_to_tongue_end0.872 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.654 INCHES NOMINAL IN
NSN5340-01-087-4268
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 3033T86 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DIAMETER: 0.025 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
DIAMETER: 0.204 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.654 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SINGLE LOOP
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.872 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL DIAMETER0.025 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN
TONGUE HOLE TYPEROUND, UNTHREADED
DIAMETER0.204 INCHES NOMINAL IN
OVERALL WIDTH0.360 INCHES MINIMUM AND 0.392 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.654 INCHES NOMINAL IN
SPECIAL FEATURESCUSHIONED
STYLE DESIGNATORSINGLE LOOP
DISTANCE FROM LOOP CENTER TO TONGUE END0.872 INCHES NOMINAL IN
LOOP INSIDE DIAMETER0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
BTP-70791-USB2Upgraded Successor
successor cross-reference
successor
108-14Upgraded Successor
successor cross-reference
successor
11739-1REVDInterchangeable
interchangeable cross-reference
interchangeable
S6624-1CHANGE1Interchangeable
interchangeable cross-reference
interchangeable
15121Interchangeable
interchangeable cross-reference
interchangeable
B94.9 1-72 UNF HS G H1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 3033T86?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 3033T86?
3033T86 is a CLAMP,LOOP.
What parts can replace 3033T86?
There are 16 known substitutes for 3033T86: BTP-70791-USB2, 108-14, 11739-1REVD and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 3033T86?
3033T86 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-087-4268. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 3033T86

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026