PartsTable
Technical Data Sheet
PartsTable / O-RING / 30319-1
30319-1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CONNECTOR,RECEPTACLE,ELECTRICAL. Key specifications include material: RUBBER SYNTHETIC, body_width: 2.000 INCHES NOMINAL IN, seat_angle: 37.0 DEGREES FIRST END, body_length: 2.000 INCHES NOMINAL IN, temp_rating: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF, thread_class: 2B FIRST END. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-291-2374, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
30319-1
NSN: 5331-00-291-2374
FSC: 5331 — O-RING
CAGE: 32195 — OUTBOARD MARINE CORP JOHNSON MOTORS DIV (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC
body_width2.000 INCHES NOMINAL IN
seat_angle37.0 DEGREES FIRST END
body_length2.000 INCHES NOMINAL IN
temp_rating-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
thread_class2B FIRST END
overall_height0.062 INCHES NOMINAL IN
connection_typeTHREADED INTERNAL TUBE FIRST END
insert_materialPLASTIC SINGLE MATING END
inside_diameter0.375 INCHES NOMINAL IN
connection_styleSWIVEL NUT FLARE FIRST END
outside_diameter0.719 INCHES MINIMUM AND 0.781 INCHES MAXIMUM IN
NSN5331-00-291-2374
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 30319-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 0.296 INCHES MINIMUM AND 0.306 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SYNTHETIC
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER0.296 INCHES MINIMUM AND 0.306 INCHES MAXIMUM IN
MATERIALRUBBER SYNTHETIC
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
72221Interchangeable
interchangeable cross-reference
interchangeable
2930006290949Interchangeable
interchangeable cross-reference
interchangeable
9346Interchangeable
interchangeable cross-reference
interchangeable
G25154Interchangeable
interchangeable cross-reference
interchangeable
X3531Interchangeable
interchangeable cross-reference
interchangeable
X3531LT2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 30319-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 30319-1?
30319-1 is a CONNECTOR,RECEPTACLE,ELECTRICAL.
What parts can replace 30319-1?
There are 20 known substitutes for 30319-1: 72221, 2930006290949, 9346 and 17 more. Substitute compatibility should be verified for your specific system.
Is 30319-1 still available?
30319-1 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 30319-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026