PartsTable
Technical Data Sheet
Download PDF

30315T614 — TURNBUCKLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

30315T614: TURNBUCKLE.

The TURNBUCKLE is a the manufacturer industrial component. Key specifications include length: 10.875 INCHES NOMINAL IN, material: STEEL OVERALL, end_style: CLEVIS AND CLEVIS, body_style: ROUND OPEN BODY, fork_width: 0.750 INCHES NOMINAL IN, body_length: 7.500 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-570-8585, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
30315T614
NSN: 5340-01-570-8585
FSC: 5340 — Hardware, Commercial
CAGE: 39428 — MCMASTER-CARR SUPPLY CO (USA)
SPECIFICATIONS
length10.875 INCHES NOMINAL IN
materialSTEEL OVERALL
end_styleCLEVIS AND CLEVIS
body_styleROUND OPEN BODY
fork_width0.750 INCHES NOMINAL IN
body_length7.500 INCHES NOMINAL IN
pinhole_diameter0.375 INCHES NOMINAL IN
special_featuresTYPE; JAW AND JAW; MATT; CAST 316 STAINLESS STEEL; CLOSED LENGTH; 10.875, OPEN; 16.875; WORK LOAD LIMIT; 1200LBS; COTTER TYPE; RING LBS
take-up_distance6.000 INCHES NOMINAL IN
nominal_thread_size0.375 INCHES OVERALL IN
end_item_identificationANTENNA
thread_series_designatorUNIFIED NATIONAL COARSE (UNC) OVERALL
NSN5340-01-570-8585
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 30315T614 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TAKE-UP DISTANCE: 6.000 INCHES NOMINAL IN
•
LENGTH: 10.875 INCHES NOMINAL IN
•
BODY STYLE: ROUND OPEN BODY
•
END STYLE: CLEVIS AND CLEVIS
•
NOMINAL THREAD SIZE: 0.375 INCHES OVERALL IN
•
BODY LENGTH: 7.500 INCHES NOMINAL IN
•
FORK WIDTH: 0.750 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
TAKE-UP DISTANCE6.000 INCHES NOMINAL IN
LENGTH10.875 INCHES NOMINAL IN
BODY STYLEROUND OPEN BODY
END STYLECLEVIS AND CLEVIS
NOMINAL THREAD SIZE0.375 INCHES OVERALL IN
BODY LENGTH7.500 INCHES NOMINAL IN
FORK WIDTH0.750 INCHES NOMINAL IN
SPECIAL FEATURESTYPE; JAW AND JAW; MATT; CAST 316 STAINLESS STEEL; CLOSED LENGTH; 10.875, OPEN; 16.875; WORK LOAD LIMIT; 1200LBS; COTTER TYPE; RING LBS
PINHOLE DIAMETER0.375 INCHES NOMINAL IN
END ITEM IDENTIFICATIONANTENNA
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 30315T614?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 30315T614?
30315T614 is a TURNBUCKLE.
What is the NSN for 30315T614?
30315T614 is cataloged in the U.S. Government catalog under NSN 5340-01-570-8585. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 30315T614

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.