PartsTable
Technical Data Sheet
Download PDF

303111 — RESISTOR,VARIABLE,WIRE WOUND,NON

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

303111: RESISTOR,VARIABLE,WIRE WOUND,NON.

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include pin_width: 0.093 INCHES MINIMUM AND 0.095 INCHES MAXIMUM IN, pin_diameter: 0.093 INCHES MINIMUM AND 0.095 INCHES MAXIMUM IN, overall_length: 0.531 INCHES NOMINAL IN, mounting_method: CRIMP, overall_diameter: 0.179 INCHES MINIMUM AND 0.182 INCHES MAXIMUM IN, special_features: OVERSIZE 12 GAGE BORE;. This part is cataloged in the U.S.

Government catalog under NSN 4720-00-057-1492, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 303111
NSN: 4720-00-057-1492
NIINs: 000571492, 005725313, 008656109, 017253781
FSC: 4720 — Hose and Flexible Tubing
CAGE: 1UVT5 — BRP US INC (USA)
SPECIFICATIONS
pin_width0.093 INCHES MINIMUM AND 0.095 INCHES MAXIMUM IN
pin_diameter0.093 INCHES MINIMUM AND 0.095 INCHES MAXIMUM IN
overall_length0.531 INCHES NOMINAL IN
mounting_methodCRIMP
overall_diameter0.179 INCHES MINIMUM AND 0.182 INCHES MAXIMUM IN
special_featuresOVERSIZE 12 GAGE BORE;
style_designatorPIN CRIMP CONTACT
mating_contact_width0.093 INCHES MINIMUM AND 0.095 INCHES MAXIMUM IN
cable_entrance_diameter0.108 INCHES MINIMUM AND 0.114 INCHES MAXIMUM IN
end_item_identificationELECT INSTL WING
identification_code_colorYELLOW FIRST COLOR
specification/standard_data97499-30-311 MANUFACTURERS STANDARD
NSN4720-00-057-1492
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: 303111 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
SUBSTITUTES & CROSS-REFERENCES 6
203909Reference document
Same NSN cross-reference
Reference document — Secondary reference
223909Reference document
Same NSN cross-reference
Reference document — Secondary reference
203409Reference document
Same NSN cross-reference
Reference document — Secondary reference
0203909Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
97Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
203287Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 303111?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 303111?
303111 is a RESISTOR,VARIABLE,WIRE WOUND,NON. It is classified as a MRO (MRO_GENERAL).
What parts can replace 303111?
There are 6 known substitutes for 303111: 203909, 223909, 203409 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 303111?
303111 is cataloged in the U.S. Government catalog under NSN 4720-00-057-1492. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 303111